Separate names with a comma.
Some features disabled for guests. Register Today.
I’m not plotting on paper. The surface is a stiff flat 3mm sign board used by sign makers. As for a mechanical issue - maybe - I’ll try tightening...
Is there a mechanical drawing that shows the exact measurements, hole and slot sizes and placement, of the X mounting plates that ship with the...
My ACRO 1010 pen plotter is still a work in progress. Started running initial tests with a pen holder I designed and 3D printed. Created a simple...
Success!! I set Min to 0 (I have not touched that parameter so don't know how it got to 255) and homed the 1010. Pen wizard started working...
log when moving servo wizard slider [13:44:06] [ M3 S158 ] ok [13:44:06] [ M3 S158 ] ok [13:44:06] [ M3 S161 ] ok [13:44:06] [ M3 S161 ] ok...
log at boot up [13:30:08] [ 3D Viewer ] WebGL Support found! success: this application will work optimally on this device! [13:30:08] [...
Question - does this crossed out "PEN UP" in Control tell you anything?
It"s not the servo. I tried several. As I said, I fly RC planes so I have over a dozen servos on hand at any given time. This one is an Emax, but...
Powered up fresh again today. Got slightly different results.The error msg in the pen up/down wizard pops up when I forget to unlock the alarm. My...
BTW - is there a way to force the help dialog boxes in Control to stay up and not fade away so quickly - on a Mac?
No, I have not been using "Flash" in Wizard to designate Grbl firmware as 2 axis + servo. I've been using the the 2 axis + servo in Grbl choice in...
Ok - trying to make progress on my 1010 plotter build, so I imported a simple svg file with single closed shape in to CAM, set the pen mode as per...
I assume I did. I followed the special "Wizard" instruction in Control when I selected 1010 + servo as machine type. It went thru a process where...
I am open to paying for a solution if necessary, if it will really handle the task and the workflow is practical - which is why I asked about...
I continue my 1010 pen plotter build by dry run testing the action of a connected servo and got unexpected results. I wired the servo as per the...
That explains the initial issue I had with Cam to cause me to bail on it at first try - Thx. As for Lightburn, Using "find & replace" to edit the...
I used to use Inkscape, but now I use Adobe Illustrator for reasons too lengthy to explain here. But Illustrator has no gcode plugin so to get to...
$27 was set to 5mm. I set it to 6mm and it solved the home bounce-back problem - Thx. But I have a new problem this today. Working with the same...
That worked - Thx. One minor quirk I noticed with the limit switch routine. After the limit switch trips, it slowly travels back in the +...
Interesting approach, but that workflow would not work for my app. My pen plot needs are far more robust and detailed than you describe. I need a...
