Separate names with a comma.
Some features disabled for guests. Register Today.
will the x32 accept gcode files from mastercam and/or deskproto for indexed rotary axis machining?
wired Y steppers in series, travel speed was increased from 1500mm to 1800mm but amps turned up almost all the way on blackbox, would changing Y...
I figured out the series wiring, i will give that a try, thanks
I changed $5 to 7 and limit triggers cleared. thanks again, that solves one of the issues I am having! second issue is when I install the limits...
thanks for your quick reply, could you expand on the stepper wiring please, my experience with series and parallel are strictly isolated general...
x32, limit switches unplugged from blackbox and wires removed from machine, there is absolutely NO short circuit or mis wiring (because there is...
I have crossed my pain threshold with this blackbox, I am more interested in actually making projects than being a gcode expert, time to find an...
I cannot find any known short in the wiring, all limit switches have been unplugged from the black box, the only thing plugged into the black box...
I have disconnected everything but the axis cables from the blackbox, vfd is powered down, still showing the state as descrided above.
i mis spoke in 1st post, z axis limit switch wont trigger even when activated, it is the x axis that stays triggered but doesn't affect operation...
limit switch shows triggered in the troubleshooting panel even with the z axis limit switch unplugged at the blackbox, the axis still moves in...
Machine is a quenbe pro 1015 with x32 controller, just setting it up but on continuous jog it only moves 6 inches or so then stops and have to...
