Separate names with a comma.
Some features disabled for guests. Register Today.
Has anyone been able to find a .50 inch collet for their Router11? Has a ER11 collet nut
I realize that this is NOT a Vetric Forum but thought I’d ask....has anyone ever experienced the attached error code when trying to open an...
Thanks
Has anyone used the “stock flattening” wizard on the openbuilds control software?
Makes perfect sense. Thanks Alex
Newbie here. Thanks in advance! While in the design mode, I always set my XY Datum at front left, top of material. When cutting, I always set my...
Anyone using the interface with the switching relay power strip from openbuilds? Wondering what setting needs to be changed in order for the...
I have to go pick up a USB-c data cable to load v1.42 directly off of open builds control. I think that this might be my issue
I am not in alarm mode. I manually set zero and attempted to run the job. Ran without an issue. When I use the XYZ, I get the following message...
I meant to attach the file. Let me check those settings.
I wanted to share how I resolved this, with the hope it might help others. As Giarc recommended, I disconnected all other components that might be...
Thanks.
Can anyone assist with this error please? After probe, and setting to material zero, the machine jogs forward and I get this error message. Brand...
I just ran a test comparison, using the probe versus setting manually. The probe was MUCH more accurate. I’ll continue with this route!
Curious to know how many of you use some sort of z-probe to find zero instead of the eyeball / piece of paper method. The probe is a pain in the ***
Justin - That DID THE TRICK!!!! Thanks
Continued..... A ball nose bit, which was why I was getting a crappy result. Thanks for the info.
Thanks Alex. I did figure out the open vector scenario because I kept getting the open vector message when trying to calculate the tool path....
Great idea. Thank you!