Separate names with a comma.
Some features disabled for guests. Register Today.
Good morning: I thought I saw a post recently about how to do calibration with the INTERFACE or CONTROL recently. However, I've tried doing...
My son helped me put together a video showing how we added 2" to the LEAD 1010 head space using 20 x 80 mm V-Slot from the Parts Store. Next video...
Running the clamp job now using INTERFACE only. Issue resolved.
Got it. Good thing that there are people who have this straight because coming into it from outside can get twisty with the details of what...
Thanks! I had seen references to the % for the Fusion 360 but didn't know it applied to INTERFACE as well.
Having successfully updated my INTERFACE to 1.43 and 1.45, I am now a bit confused as I try to load GCODE files via the USB. I have been...
Received my USB-C cable this afternoon and successfully managed to update the INTERFACE. Just in time to run some parts for a friend who is fixing...
Have ordered a USB-C data cable for updating.
Ah. Sorry. Hopefully that will work.
I thought that was referring to the cable that connected to between the Blackbox and the INTERFACE. So the cable with the USB connection that was...
Set up my INTERFACE this afternoon. Got to the step where you update the Firmware and have hit a weird wall. Everything appears to be working on...
Ran my first cut job on the Lead 1010 yesterday. It was both a success and a resounding failure. Did not obtain any usable parts from the run,...
I should also note that the readjustment of the carrier wheels succeeded in addressing any Y-axis offset issues. Returned to Home with no...
Ran a self-generated Gcode job on the 1010 this morning to try and understand the difference between the Openbuilds generator and SketchuCam. It...
Quick update: completed rebuild to add longer 20x80 to the Y-carriages. After doing some measuring, determined that 350 mm was too much and...
I worry about getting them too tight. Is it enough to just have zero-lash in the plate assembly relative to the C-beam? I suspect that my...
Build complete. Now working on clamping fixtures for EPP foam. Need to order a few odds and ends to set up router relay and address MDF board...
Thanks, Peter!
Obviously, since many others have built and innovated off of the Openbuilds 1010 already, this is far from earth-shattering, but my LEAD 1010 is...
I have a tool deck that Mark put together alone with sliding MDF "guides" that I use as edge alignment to center the job. Performance depends a...