Separate names with a comma.
Some features disabled for guests. Register Today.
Is it possible to upgrade to a more powerful router on to 1515
I would first home the router,at that point X and Y would be set at zero then I would use the touch plate on top of my half-inch material that I...
So the only two items I need help with now is the feed rate, and the depth of the first cut. In my mosaic software when I create the job, I have...
While the machine is cutting the fee rate is at 100% which is 138 inches per minute when I drag the sliding bar down to 45% it’s still cuts at 130...
Yes, I have a lot to learn on the bits. Thank you.
The endmill I was going to use is a 1/4 compression bit but from what I’m understanding it needs to cut at least 3/8 of an inch in order for it to...
Thank you very much it worked perfectly that time which was a dry run with no bit. Before I put in a bit and cut it for real, is this machine...
Ok
I still need a little more help. I removed all the software and I have reinstalled it. I have watched the video in my Grbl settings, the limit...
when I open the open build app on my laptop, and I go to troubleshooting next to machine control, it says Y limit X limit Z limit probe door...
it is your controller it's a Lead 1515
I would like to get my soft limits set correctly but because I do not know how to do this it sounds like I am stuck, as there is no customer...
I clicked on the link, and I have no idea what it is saying or what to do. It's completely French to me. Is there a video or a simpler step by...
Thank you
Can you send me a link on how to set up soft limits?
I am attempting my first job and 30 seconds into it it comes up with error n9 G-code locked out during alarm or jog state Y374.6500 This alarm may...
I am new to the CNC world and know very little on how to run or operate one. Putting it together was the easy part. The step-by-step video was...
With ur help I have cut Hello World and resurfaced a small piece of spoil board. Thanks so much. How do I tram the router. I used a 1 in bit wth...
I then used the USB drive formatted it first then copy the files to it and upload it to the interface here are four pictures in the order of...
I am going through the steps one at a time, right now I am working with the interface I have got it connected to the Internet but when I go to...
