Separate names with a comma.
Some features disabled for guests. Register Today.
I found out that the motor is Vex Robotics Mini CIM motor. If I buy it at Vex Robotics store, it will cost me $30 plus shipping. The item number...
I tried "Go to global site" and I get motors but I don't know which one the person used. There are markings on the black cylinder but I don't know...
The person who built the lathe didn't specify the motor or holesaws or bearings. The links to AliExpress display pages with foreign language. The...
There is mini lathe on Instructable at Mini Lathe Machine for Woodworking I'm thinking of building it because I have some stuff left over from...
About 10 years ago, I was given a Phoenix CNC router inside a cabinet. Its working area is about 21 inches by 21 inches. The company that built...
Make sure that your laptop is plugged into wall outlet and disable power-saving features.
Download the Arduino IDE software at Arduino - Software and install it. This will install the USB driver.
Put the screwdriver between the bearings in the hole where bolts go through.
Make sure that the laptop is plugged into a wall outlet and in the "Power & Sleep" setting window, change both "screen" and "sleep" to "never".
Use a small flat screwdriver to pop the bearings out of the wheels. The shims are needed between bearings so that the wheels roll smoothly without...
PDF file format, please.
After reading the thread at New here. Nice place! , I'm interested in building a larger version of my PowerSpec 3D Pro 2 printer shown at...
Use brand new router bits and slow feed rates. Dull router bits and/or too fast feed rates will ruin the job.
Use real wood, not MDF.
You'll need stepper motors, driver board, power supply unit, router, and wiring kit. It looks like the Part Store is out of stock of CNC XPro board.
I got two stepper motor drivers from Amazon today and replaced the bad drivers with new ones. Should all drivers be same? I didn't replace the old...
I found stepper motor drivers at...
I took the control panel off the machine and found out that external driver for Z-Axis has green light, driver for Y-Axis has no lights, and...
I have CNC router with CNC XPro V3 board, three external drivers, and three NEMA 34 motors. This afternoon, I tried to set up the machine by...
What about roller coaster tracks and wheels? I tried to search the Internet for info on how the wheels are attached to cars so that the wheels can...