Separate names with a comma.
Some features disabled for guests. Register Today.
What about garage door tracks and wheels?
I know that McMaster-Carr has CAD files for most of their products. C-Channels are usually sized by their outside dimensions. How can I find out...
I watched that video and I'm not sure about building that stair lift. Do I need to set the C-channel so that it touches the top of the wheels on...
I visited the website and while the rail system is better, I would like wheels on top and bottom of rails for safety reasons, using carriages...
My mother fall down the stairs and broke her leg. I found out that a stair lift costs $3,000 or more and that medical insurance won't pay for it....
I try to find black/white images but sometimes, I have to clean up the images after tracing them so that the job looks good after setting up...
Is there software for converting image files into vector files? Inkscape doesn't do it well. I download image files from websites and try to...
I know that GRBL settings are stored on CNC XPro board. When I run GRBL Panel, I have to get GRBL settings from the board. Is it possible to...
I suggest that you junk the Chinese machine and buy one of the machines at Open Builds store.
My CNC router has CNC XPro V3 board, three limit switches, and GRBL Panel. I had to replace the limit switches because one of them was not...
I found the switches that I need at: https://www.digikey.com/product-detail/en/D2VW-5L2-1HS/SW437-ND/277828/?itemSeq=280403967
I searched the Internet for sealed limit switches and found some at...
The X-Axis carriage is the one that holds the spindle or router. Move that carriage so that it hits the 90 Degree Joining Plates before trying to...
Using the 90 Degree Joining Plates on top of the X-Axis gantry will limit the amount of travel that the X-Axis carriage can move. The carriage...
Are you sure that you didn't throw out all of the plastic wrapping without checking for parts. Openbuilds store does very good job packing stuff...
Cut out a 100mm X 100mm square piece. Use a digital caliper to measure the piece. If the piece is 99mm X 99mm, divide 100 by 99 to get 1.010101....
In VCarve's Tool Database, a 3mm endmill is set up so that it is 3mm diameter. I hope that you set up the 3mm endmill in ESTLCAM so that it is 3mm...
I don't think that drill motors with gearboxes work well for CNC routing. Router motors are better suited for CNC routing.
Did you tell ESTLCAM to use 3mm bit and did you tell ESTLCAM to cut outside the line for the whole piece and inside the line for the hole?