Separate names with a comma.
Some features disabled for guests. Register Today.
What software do you use to design the plywood tray handle?
What kind of connectors are these shown at Xtension Connectors ? I wish to buy them having at least 24 pins at other stores.
I watched the build video. Why not use Black Angle Corner Connector instead of Cast Corner Bracket or file the tabs off the Cast Corner Brackets?
How do I reset the XPro?
I watched some videos on calibrating CNC routers. I have GRBL Panel software and CNC XPro board. While calibrating my CNC router, I had to set the...
Download the Arduino IDE software and install it. This should install the USB driver.
I use "Go to Special Position 1" and "Go to Special Position 2" buttons for auto-zero probe. First button moves the Z-Axis down until the bit...
Bad news: On my machine at home, one of the onboard stepper motor drivers on the CNC XPRO board committed suicide while replacing the NEMA 17...
I connected the fan to the PSU and it ran so I cancelled the order for new fan. I think that the header on the board is for fans with three wires...
I found out that the fan cooling the board stopped running. I ordered a new fan. Should I connect it to the board or the PSU?
In GRBL Panel's Settings tab, Click "Enable keyboard arrows" so that you can use the keypad to jog the machine. I tried to use UGS Platform but I...
My machines has CNC XPro V3 boards. I tried to search the Internet to see if I can jog the machines using gamepad or keypad but I couldn't find...
I have an USB keypad usually used for people using notebook computers that don't have numeric keypads. I want to use it to jog the machine.
The uSTEP jumper settings are set at 8 uSteps. I found out from the Wiki that the Abort/Reset switch needs to be NO and that the E-Stop switch...
At the program, I used VCarve to create toolpath to cut a 5" square and a 5" circle. I saved the toolpath to GRBL code file. I loaded the file...
I used VCarve to create toolpath to cut a 5" square. I saved the toolpath to GRBL code file. I loaded the file into GRBL Panel. I did a "test" cut...
I finally got my CNC router working today using CNC XPRO board. I thought I need the 7.8A stepper motor drivers because the stepper motors that...
Can external stepper motor drivers go bad? There appeared to be slight burning smell and I thought it came from breakout board shown at PROBOTIX...
I got confused trying to wire the external stepper drivers to the CNC XPRO as shown at Hooking Up External Drivers to the CNC xPRO V3 The pictures...
I tried to connect the Smoothieboard to my CNC router that I built at home and couldn't get the motors to work. I tried Protoface and bCNC...
