Separate names with a comma.
Some features disabled for guests. Register Today.
I tried to fix the machine but I think that PBX-RF RF Isolated CNC Breakout Board may be bad because the limit switches and the E-Stop stay on...
At the program for mentally-handicapped people where I work, I have a large CNC Router that my woodshop teachers got from a school several years...
You'll need stepper motor drivers shown at DQ542MA Stepper Motor Driver because the max amount of current draw is 2.5A on the Xpro controller.
Amazon is building a new distribution warehouse in Staten Island, NY.
Try one of these shop vacuums at Dust Extractors & Collectors.
I watched the wiring video and found out that there is serious safety issue. There must be a switch and a fuse on the AC input of the power...
[ATTACH] Which stepper drivers are those shown the in image? The ones that Open Builds Store sells are different kind.
If the brushes and bearings are bad, it's possible that the armature is bad. It's better to buy a new spindle than to fix the old one. If you...
Stop using that spindle. The brushes are bad.
If the distances are not same, turn off the machine and move the gantry on the side that don't have the limit/homing switch so that the distances...
Home the machine and use a ruler to measure the distance between the Y-Axis plates and the ends of the C-Beams. If the distances are not same,...
What's the green wire attached to the router for?
What program did you use to create toolpaths?
It looks like the toolpath is set to inches and UGS is set to millimeters. Scale the toolpath up 25.4.
I thought that a 2x4 piece of wood is really 1-1/2" and 3-1/2" but someone told me that they are not really 1-1/2" and 3-1/2". they may slightly...
The motors draw 2.8A/phase. The board can handle 2.5A/phase You can buy machine bundles with these parts on the Part Store website. My electronics...
The Part Store is an online store. The store has machine bundles with or without motors, electronics, and other things. Click on "Part Store" in...
Don't buy the machine sold at eBay. Buy one of the machines sold at the Part Store.
I have been watching the video tutorials at Fusion 360 Tutorial | Technology Tutorials and I thought that he's a good teacher. He shows you how to...
Will the SPHINX end plates be made available separately so that I can mount them on my machine?