Separate names with a comma.
Some features disabled for guests. Register Today.
If the photos from my post above are not working - I put them here: https://goo.gl/photos/EZcoV3XSA4E15Vug7
The mini wheels I use are Delrin Mini V Wheel™ Kit Which larger wheels are you trying to use? Is it these?: Solid V Wheel™ Kit I might be able...
Someone asked me about specific dimensions of my build. I have made 4 sizes of this printer, however I will share the measurements of my 320mm...
Dan, I designed that carriage to work with the 2040 and delrin mini wheels as shown in all my photos. If you get the mini wheels the carriage...
I think they're almost permanently in the mounts - it would take considerable effort to remove them. I didn't want any chance of the hot end...
Now is also a good time to mention.... I revised my extruder mounting to have the bowden tube at an angle I like better and to make it a little...
I suspect you noticed the E3D groove does not want to snap into final position as if my design isn't quite wide enough? I designed it to be very...
My new carriage design changed the offset of the belt relative to the tower, so I needed to revise the belt idler roller bracket such that the...
My new extruder - a modified version of this which I'm running with great success on this big delta printer: B'Struder: Universal Bowden 1.75mm...
Long overdue update... I got busy with other work and now have several massive 3D printing jobs to do - over 20,ooo parts to be printed in...
Progress report: it is now running a 20 hour production print job! Calibration cubes and other small test prints have been as close to perfect as...
Now I have it printing its own cooling fan ducts from PETG: https://goo.gl/photos/h9ucwdBeNenakcio8
It is running! :-) First print video: https://goo.gl/photos/iLR45rEwGqzyDJTW7 and https://goo.gl/photos/3y88xqDRfuDeizWD7 This test print is...
More progress photos for now. I need to clean up the mess of files in my modeling directory and then I will post a zip file containing all the STL...
Yes, I will try to make a zip of them tonight or tomorrow along with many more progress photos.
It moves! Today I got the tower steppers and end-stops wired up along with mounting the PanelDue. After putting my critical dimensions from my...
After not liking the direction I was heading with the PanelDue mounting I decided to do something easier while thinking more about mounting the...
Progress.... Motors, belts, carriages, rods, and Duet board installed. I made a pair of brackets to mount the Duet. My enclosure for the...
My carriage and idler pulley design: The carriage has two pockets for a piece of 1/4" x 1/2" aluminum flat stock with holes drilled for the bolts...
Trying again on the missing images... [ATTACH] [ATTACH] [ATTACH]
