Separate names with a comma.
Some features disabled for guests. Register Today.
Well it has been great discuss this back and forward with you. Thanks again and have a great week.
Hi Misterg, I am with you completely. Interesting what you said. A machine design in the UK has precisely the construction you are speaking of,...
If I may ask (as I have my own thoughts) why do believe Nema17 motors would not be able to assist to make a 1 micron cutter in titanium. Are you...
Hi Misterg, Thank you for the feedback. I agree this is not a trivial application by any stretch of the imagination. I appreciate all the...
I am looking into each of the grbl settings and what is important. Which of these settings should I be looking to optimise or test for the best...
Hi Misterg, Thank you for the information. I attached the incorrect file. Please see attached and I forgot to mention I have a 1 mm pitch lead...
Hi Peter, Do you mean it is all to do with the G-code sequence set-up? Thank you.
Hi JustinTime. My bad, sorry. I would be milling Ti6Al4V titanium. As I plunge, I would calculate the speeds and feeds accordingly. I would mill...
To whom it may concern: I will be milling out 1 mm diameter holes with a 0.6 mm end mill. I have a "stiff" machine with a spindle that can run...
Thank you, Peter, Much appreciated, as always.
To whom it may concern: Am I correct the wiring of the OpenBuilds Nema17 stepper motors with the OpenBuilds X32 Blackbox Motion control system?...
Thank you, much appreciated. Thanks again for the great controller and CAM software, besides this magnificent controller.
Hi Peter, Thank you for your reply. From the grbl wiki (Home ยท gnea/grbl Wiki (github.com)) I have found the following link: LinuxCNC "G-Code"...
To whom it may concern: Where is the best place to get the complete list of G-code commands for the latest OpenBuilds BlackBox X32 motion...
Thank you! I appreciate the assistance, the X32 is up and running! Have a great New Year.
I recently purchased the Openbuilds Blackbox X32 after previously using the original Blackbox. I have simply replaced the plugs from one...
Thank you for this information, I was not aware. I will check this.
Thank you, Peter. I will re-wire now and set the current anti-clockwise for the minimum setting to start.
Hi Peter, Thank you for telling me to read the Blackbox manual. I have found the following image for the wiring for the Nema17 motor to the...
Hi Peter, Thank you for the reply. I will review the complete Blackbox documentation. Are the temperatures I measured excessive?
