Separate names with a comma.
Some features disabled for guests. Register Today.
Absolutely the opposite. Find the source of the interference and fix that! Whatever is creating so much EMI should be brought in line. Can't...
Sounds like laser has an inverted input (active low signal instead of more usual active high?) - might also explain other power level issues then;...
Then Would fit perfectly
Check your Max Travel values in Grbl Settings. See Grbl v1.1 Configuration Can home to the front, Max Travel calculates the theoretical back...
Its a different add-in thats complaining, read the onscreen error: the OpenBOM plugin by Newman Cloud. Not us. OpenBOM ᐈ Bill of Materials, Cloud...
We never did a 65mm mount but there are knockoffs of our mount with a 65mm ID on the scaly parts of the internet. Still for a long spindle, dual...
Are you remembering to HOME the machine? (Clearance moves are in Machine Coordinates, so needs Homing then SetZero)
$3 Direction Invert
See Tramming: A generic guideline
M3/5 does the relay M3Sxxxx does PWM/0-10v Which is why i recommended Let the buttons do it before you forget half the command
Yip G53 G0 Z-5 = up and away stop 5mm before Z homing switch. Means you probably forgot to Home, then Setzero. Watch the hello world tutorial...
24v supply connected and on?
Instructions already provided in my first reply (docs shows how to measure with MULTIMETER) $33=5000.0 ; Spindle PWM frequency Try 1000
I don't see that I suggested a Fw update was the issue, so more random recklessness. Instead of the advice that was offered being followed step by...
Depends on all electric specs (not motor's mounting hole localations - that is what the Nema specs define so 23 vs 34 almost irrelevant). Set...
Plugging a 0-10v device into a 3.3v PWM could have damaged your controller. Random wiring is extremely reckless. Follow documentation (and logic...
<offset> = probe + endmill radius so hardcoding an offset - one has to use same bit/dowel for probing then as endmill diameter menu was part of...
Jog to. Click Setzero (: or buy a Probe
Make sure to load a machine profile from CONTROL > Grbl Settings > Select a machine from the list, save and reset / OR/ make sure you have PSU...
Ok, so you would have to reach out to Carveco support and ask them how to edit in a spindle start delay for the post processor, so that Carveco...
