Separate names with a comma.
Some features disabled for guests. Register Today.
Applying a light coat of oil to the screw heads after you install them will prevent the oxidation. A cotton swab works well to get down into the...
Great build. I used a similar mechanical layout. Proves to be very ridged. Those aviation plugs were a pita for me. I used 18ga which was most...
If you're in a binder then lard, kerosene, wd40, and thick dish soap work well too.
Sounds good. Can't wait to see pictures.
I'm curious too.
The op may be content with GRBL and compatible software. Bypassing the xpro drivers and sending the step and direction signals to higher rated...
Sounds like you need to turn down your max vel settings. The faster you drive a stepper the less torque it has and less less force it takes to...
Contact Solarjean on eBay. You can probably get a whole set with ends for that much. Shipping takes forever though.
Hey Bob, AR15 posted the calculator links. The steppers offered in the Openbuilds partstore now have the torque curves in the picture section. I...
450 is more than enough. Youd likely be okay in the 50-100lb range. You still have to go through the entire system though. Consider what you...
Attach a handdrill to the screw and run them in until they loosen up some.
Please email support at the link above.
Paul, AutoCAD isn't similar to fusion. Have you tried posting your issues with the F360 community? You can also try posting your troubles in a...
Was asked this by a PC guy years ago about bios updates. Why yes! Because you expect the same functionality plus an improvement over the past...
I chose the 1610s. Fairly happy with them.
Nice. I thought about making a set as a gift to my sister. Thanks for the link. Anonomous gifter? Was this from a forum member?
We'll get you going. Show us what gear you have.
Google video search "Stepper motor music" There are a number of them. Fun stuff.
You can use either full coil or half coil. For full coil use the outside pairs and leave the centers untapped. Orange and blue is one coil(-B....
Aluminum is a horrible choice for a wear surface for metal on metal contact. Even aluminum on aluminum doesn't work well. It galls up and eats...
