Separate names with a comma.
Some features disabled for guests. Register Today.
Sorry, my ancient phone won't play mp4's, but from your description I would strongly suspect one intermittent connection in the stepper motor...
As @Peter Van Der Walt said, and if you can label the X and Y axes that would help also. Alex.
I use the RoutER11 CNC Kit which is MUCH quieter than any other router I have used (and that's a lot of different makes both 1/4" and 1/2") -...
Not enough memory on the Arduino to install anything more than basic grbl. Alex.
Have you checked that the grub screws in the motor coupler are still tight, and one is on the flat of the motor shaft? Unlikely to be the stepper...
Sorry, but there's no way that the stepper motors you are using will achieve what you are trying to do. Have a read of this post (Vertical linear...
Too heavy and far more powerful than you will ever be able to use (or need). That is nearly 3 Horse power which would be a respectable power unit...
Win 11 is not the issue. A g-code file is just a simple text file containing step by step commands for your machine. More likely is an error in...
Check that your machine frame is still square, especially that the X gantry is still square to the Y axis. Your stall when you pushed it too hard...
By default Ooznest sell the workbee kit with the Duet controller - it uses Rep-Rap dialect of g-code and is not compatible with Mach control...
Can you upload an example g-code file? Alex.
Best to always follow Ooznest's instructions rather than the ones you started with - they have got the firmware sorted for a cnc machine and...
1) send M115 to check your firmware version and some details of your hardware - tell me what the result is. One thing that concerned me about your...
Did you do this step? - the files here are the ones that haven't been uploaded. 3. Connecting, Updating and Configuring Your WorkBee Step 5 & 7...
Some of the files from Ooznest have not uploaded - I have those files on a different PC, so I'll come back to you when I get that one warmed up....
That is the user interface for a 3d printer. Did you download and extrract the V1.0.7 firmware from Ooznest? If so try the steps in the link...
The Duet uses REP-RAP firmware - Ooznest's User Interface and config files run on top of that. Version 2.03 of the REP-RAP firmware is correct for...
The link you quoted earlier gave the instructions for ALL the versions of the Rep-Rap firmware - which version did you install? How are you...
[ATTACH]
@llukas I'm guessing what version of workbee you have, but better to follow the Ooznest instructions. For now I would suggest NOT updating your...
