Separate names with a comma.
Some features disabled for guests. Register Today.
You need to be careful with G28. It defaults to Machine 0 ("home") but you can override that to anywhere on the machine. If you're using...
I can tell you it works fine with the blackbox and the IOT router. So what's your setup? If you manually turn the router on and the M3 turns if...
Its not off by much. So here are some things to check. By themselves they may not cause the amount of offset you are seeing, but added up, they...
I suggest you also read this: Frequently Asked Questions · gnea/grbl Wiki It will help you understand why saying "Like for X all the way to the...
You set that up in the grbl settings tab, $23 Homing Direction (Set up the Homing Cycle · gnea/grbl Wiki). Before doing that, make sure your...
No, not at this time. If you dont understand gcode enough to edit it to start where you want, then we suggest re-cam your part from where it...
Not the post processor. The machine profile you are using. Did you create it yourself?
Where did you get the machine profile from?
Maybe startup license doesnt allow for it. I dont know.
I originally set mine up that way. I've used the t-slots a handful of times. I use screws sometimes, but more times than not I use doublesided tape.
I cant replicate that error. What happens if you dont select a machine in your setup and DONT check "Use machine configuration" in the Machine...
Are you sure you mean setup? Creating a new setup doesnt involve the post processor at all. What version of the post are you using? What...
Because in the last line, the machine will move to X-10 Y300. So it's correct as far as the "extents" of the code you are supplying. In the post...
Hard to say without seeing the fusion file and what you expect to happen. But my guess is that you dont have the coordinate directions set...
M3 is there. Maybe you mean coolant? ; Surfacing / Flattening Operation ; Endmill Diameter: 22mm ; Stepover: 40%, Feedrate: 800mm/min ; X: 200,...
Buy a Lead and cut the extrusions and lead screws to whatever size you want. OpenBuilds LEAD CNC Machine 1010 (40" x 40") Though I would suggest...
The blackbox has drivers. Check out this electronics bundle: CNC Electronics Bundle Also, here's docs on the bb: docs:blackbox:start...
Been there, done that. The accuracy of those are awful. There's too much axial play in them.
First make sure everything jogs in the correct direction. Go into grbl and invert the Z axis direction (setting $3). Once you have the axis...
G53 Z-10 is a clearance move. It will move to 10mm below your z limit switch. Then move to the first position. By the looks of the log it...
