Separate names with a comma.
Some features disabled for guests. Register Today.
I meant size as in physical dimensions.
The cube uses normal size thermistors. I think they are 200k. You can re-use them if you can find an old-style heater block for the E3Dv6. (The...
I would expect this error in that case. The thermistors are connected through a switch that closes when a nozzle is installed. If you remove the...
Using a custom device class doesn't mean someone couldn't talk to it with their app, it just means you have to know how to talk to it beforehand....
Bad news. I was able to successfully connect to the PIC24FJ on the bluetooth module via ICSP, but this one actually has code protection enabled,...
A while back I traced the lines from the USB device port (the one next to the power connector) and they go to the bluetooth module. I assumed it...
I was just doing the napkin math for heatbed power this weekend. I'm working on a CubeRap conversion, and I had a MK2B pcb heater lying around. I...
I don't think it's that complicated. I'm pretty sure it's just measuring the reflected brightness of the LED. I've torn down the extruder pod and...
Lots of measurements and then throwing them all away when they don't work and just trying some numbers. (It's what I like to call "engineering"!)...
It's my guess that the firmware version isn't reported by the firmware itself. There's a file on the sd card called "magellan_software.xml" that...
Yeah, that's the whole point of the Mic-6. According to the specs from Alcoa, the surface is machined to 0.5 micron smoothness, and you can...
I just bought a 6x6" plate of Mic6 aluminum from onlinemetals.com, hoping to use it for the print bed on a cube-rap. (Mic6 is what Printrbot has...
Or you could avoid the whole thing and print on glass. You can use 5x7" glass from any picture frame. Throw in a few bulldog clips from the dollar...
I believe it's aluminum or zirconium oxide ceramic. I recently bought some kitchen knives that have the same surface feel. I looked around on...
I got tired of having to search for the same part numbers over and over, so I put together a BOM for the Cube3. It's far from complete, but it's a...
Looks like a slowly progressive z-hop instead of an instant one.
I knew as soon as I said that the first byte was the filament type code that I didn't have enough samples to say that. So I generated some cube3...
I've done quite a bit of work on this, as well. I've gathered dumps from 6 or 8 different carts, including 2 ABS ones. I used a BusPirate, which I...
Has anyone ever tried putting CubePro firmware on a Cube3? I read in the other thread that they both use the same controller board. I would assume...
I didn't say the address was wrong. I was talking about the physical location of that row in the hex file. It needs to come before any of the...