Separate names with a comma.
Some features disabled for guests. Register Today.
1.8 are better for torque they do have less accuracy but where talking small numbers. 0.9 have less torque but are more accurate at high speed....
If your using a decent nema 23 then you will not have any problems. You would have to look into bearings for the rod. You can drill the plate...
I want to make a Water jet cutting machine. but im going to have to let my wallet recover just dropped 1200 bucks on electronics because i failed...
Bow before the solder king fore I let knowledge be known.[IMG] Much of what your asking is hard to answere without knowing what it is your...
Just a quick update getting a lot of electronics arriving and i finished the control panel front check it out and dont forget to vote i dont want...
[ATTACH] I really had no plan on documenting this build mostly because I had no real plan. All I knew was what I wanted. It had to be big i ended...
Not in my build but its simple to add another motor on top if needed u can just copy whats on bottom but i have my x with 2 570 oz steppers . I...
with an exact part list i could see this machine with the electronics ive chosen to be around 4,000 But the frame itself was around 700. then the...
First of all thank you for your interest in my build. The frame it self is strong and i dont see why i wouldnt work for a 4kw spindle.But i would...
I decided to buy most of what i need to get this beast moving and a few changes. Motors: I decided on 570oz nema 23 5 amp bi-polar motors Drivers:...
I was going to run 1500mm screws but they where just 2 floppy. you would be better off with 12mm acme rod.If they have a dip or slack they will...
https://openbuilds.com/builds/5-x-5-plasma-simple-build.6133/ Its a good build.
If your doing a real mill i would go with pokeys all day long PoStep60-256 - Stepper Motor Driver - Polabs PoKeys57CNC - USB and Ethernet CNC...
More voltage = more torque but less accuracy its best to get something in the middle. if your going to be microstepping.
First im not a coder or anything but dont you have to remove the "#" in front of all that stuff for it to work? im not sure but i did on...
Make sure you have enough power to run the motors You could have a noise issue reconfigure your pulse timing if you can
Well my grand plans of using affim to get the rest of my electronics motors, drivers, switches fell through. turns out that i cant just take one...
All i know is the TB6600 is based off of the Toshiba TB6600HG chip . It would drive the motor but I wouldn't cheap out. these drives from china...
HSD ES 919 7.5kW, 10HP high speed spindle motor for CNC Router | eBay...
Router: A router runs loud this has to do with the type of frequency's involved in turning the motor. Spindle:A Spindle in Quiet in comparison...
