Separate names with a comma.
Some features disabled for guests. Register Today.
Yes, but I'll have directional flow plates inside the cabinet The incoming air will be coming in the gap you see here. Airflow should flow...
Wow, Peter, that is one hell of a complement. Thank You very much. Here is my build if you haven't already viewed it. Rodney's new Laser
The bottom is done and sealed up. I went looking for a 2"X24" HVAC floor vent for 6" vent pipe, but had no luck finding one off the shelf. Could...
I helped build a friend's laser and he started with 5 start, 5/8" diameter, 1/2" lead (moved 1/2" ever revolution) leadscrews and they whipped...
Your building a cutting laser only. Your leadscrews will be whipping going the speed you need to any serious engraving work. You would be a lot...
Acrylic window in place but not sealed yet. I had this piece and it fit, so I used it instead of glass [IMG] This is about where the bed...
Thanks, It did turn out better than I thought it would.
Thanks for the heads up on the static pressure of the different fans. If the air exchange is too much this winter for the furnace, I will...
I'll have a duct vent on the bottom where the pipe with the fan will attach.
I printed some tubing holders for tubing management. You can also see my visual water meter with temp probe in it. [IMG] [IMG]...
Since cutting the acrylic, the fume extraction didn't work all that well, and I haven't tried to use it at all since. The acrylic smell hung...
Have you got the parts yet???? I know how frustrating it is waiting.
Did a mirror alignment and it will cut the same on all 4 corners now. I'm going to cut out a N scale structure today and see how well it engraves...
After getting fume extraction ducting installed, I set the parameters on the CW-5000 chiller to hold a consistent 20 degrees C. I cut a 200mm...
I double checked and I had it right. There was a couple of people left reviews that had the same problem. I was hoping I would get a good one.
The 24 volt pneumatic valve I got leaks a small amount of air when the machine of off. Got it off Amazon, so it's going back. I might look at...
Last night went to get a sheet of 3/4" plywood and had sticker shock. $62 for a sheet of 3/4" AC plywood is outrageous. I bought a sheet last...
This morning I switched 2 stepper wires on each of the X and Y axis drivers and both axis limit switch wires and it homes as it should. The arrows...
I got the X and Y pretty close as far as size and movement, but it homes to the lower right and I want it to home upper left. Also the arrows are...
All I have left to do is the Z axis limit switches, and the water and air pluming needs to be done. I'm waiting on parts that will be here Friday....
