Separate names with a comma.
Some features disabled for guests. Register Today.
In the next day or so, I'll be getting ready to wire limit switches. I'm going to have both home and max on both the X and Y. Can I run both home...
Yea Kevon, you can't see it in the photo, but there is gap on both sides.
A little more done [IMG] Bed is ready [IMG] And mounted [IMG] Tube mounts are next and then start mounting the...
That's why they keep very few in stock. My K40 tube was made 4-30 of 2015 and it's still going and I've used it a lot. SPT tubes that Marco...
Mine are .750" wide X .062" thick flat bar stock. Try to get it locally and see if they will cut to length or get a long piece and cut it on a...
I ordered the Cloudray Ruida RDC6445G controller and should be here by the end of the week. I will need some help from someone when I get ready to...
Getting there slowly. [IMG] [IMG]
That was at least 25 years ago and at the time, I had no idea what I was going to do with it. It was in a fab shop aluminum recycle bin. I ask the...
When I installed the honeycomb bed in my K40, I made so it was a down draft fume extraction as I mostly only cut with it. It uses a 12V 360 CFM...
Well I don't have any in stock. It'll work fine the way I got it planed. The Z axis only needs to stay level and don't need any real speed. The...
Going with what I have on hand. On second thought, I might have some thrust bearings. I'll have to go check my stock.
Did get a little more done. I got the Z axis bearing plates and the Z nuts made. I need to wait till I get the bed and frame made before I cut...
Thanks Kevon, That makes more sense really than try to fix something that hasn't happened yet. Thanks Rob From what I can see, those closed...
I've been thinking about changing the stepper motors. I ran across this video while looking at Automation Technology's hybird steppers. [MEDIA]...
Got one idler done for the Y. I was working on both sides, but I messed the other side up. I got redo it from scratch. Still need to trim the...
Thanks Rob, This is the head set I have coming. It more of convenience to just bolt it in place on the bearing block. [IMG]
I might of missed it, but looking over your wiring, I see no EMI filter. Are you going to one??
M3, 15mm wide
Idler mount for the "Y" is done. Note the peenning around the bearing. These new bearings I got were .001" under on the OD. This works in most...
A change in plans for the drive of the Y axis. I will be using a 282oz nema 23 that will be driven 2 to 1. Just ordered the belt and pulleys from...
