Separate names with a comma.
Some features disabled for guests. Register Today.
I got the waiting for usb status again at startup. I have opened device manager to see what was going on, I've attached 3 screenshots of the...
Some additional information/update... Yesterday afternoon I ran an air cut, no power to spindle, no vacuum, no issues. This morning I turned the...
Thank you for the links, as I have said repeatedly. I now have some solid information to work with in a couple of areas I did not know were even...
Very informative, Thank You...!
Thanks everyone, all possibilities and good tips. My vfd is about 3' away from the black box and the computer but the spindle power passes...
Another question... What might cause EMI and how far might the broadcast radius be? I don't have anything around but the computer, control...
I was considering "all of the above" it seemed odd it would start happening with some regularity right after an update but that is a...
This just happened again while resetting the machine coordinates after the accident. There was no file loaded and no restart necessary just a...
I have encountered a "glitch" in the software during the running of cad files I will try to explain... This has happened 3 times since the latest...
Yours, I'm crossing my fingers the max speeds was the issue, I reduced them and the "slipping" disappeared.
OK, max speeds reduced to 2500mm/min. I've just run the file I noticed the slipping, 3d surfacing with the largest bit I use a 2 flute carbide 2"...
Trying that now. Thank You!
Yes, I should have mentioned black Box. I found the doc from another thread, looking at that now. Slipping is the best way I can describe what...
Grubs crews and shaft couplers are tight, the slippage is internal Where do I find current settings? acceleration is set at 500mm/sec2, max...
Hi all, The two nema 23 motors controlling my gantry (x) and vertical (z) threaded drives have started slipping. I have two (same) motors...
I considered that and was careful to align the centrics during the setup. I check the machine regularly as I have noticed the loosening effect on...
There was way too much play to take up with the little bit of movement in the plates as they were machined however... Problem solved, the thought...
Thank You!
Thank You Alex, I'll give that a try.
Hi all, I am having an issue with the centric adjustment on an cbeam xl linear actuator bundle. I cant get the wheels tight enough on the cbeam...
