Separate names with a comma.
Some features disabled for guests. Register Today.
I have a fairly heavy preload on them
I had some self lubing bronze wheels machined
Designed a new wheel and wear testing the prototype. [MEDIA]
So does that mean at 12:01 I can finally see them
If you are using the cast corners they are never square...not by a long shot. Stick with the machined ones..they cost more but they work
@nate campbell Hey what prox are you using for your limits?
@MaryD When are we going to see a build from you
Anything you lift with a belt you'll need to add a brake to hold the load... I'd go with lead screw...You lose about 40% in efficiency but you...
Hey just curious on how some of you have mounted home/limit switches on your z axis?
EZ-StepCnC
@Ronald van Arkel Interesting :)
I've never seen the need for higher resolution steppers. For example an 4 start 2mm pitch rod which is the standard on open builds moves 8mm per...
You might want to stick with a stepper that is 1.8deg per step...Just my .02 ;)
Been using Mach3 for years and this is the first time I couldn't figure something out. I have all my parameters configured but there is no slow...
Single 22AWG is good for 8 amps...4-6 conductors derate by 80% which comes out to be 6.4A I don't recommend running at max ampacity, but 4 amps...
@dean knipping Ive been getting my tooling from End Mill Discount - Carbide End Mills, Routers, Micro Tools, Thread Mills for quite awhile
Printer :)
@UltiBots Sorry don't know how I missed your post. I have used the 1/8" 2 flute and 4 flute when cutting aluminum. The four flute gives a...
Thanks @Mark Carew I've had it on hold for couple weeks so I could finish up a different one for someone.
Who can print me an adapter sleeve for the DW611?