Separate names with a comma.
Some features disabled for guests. Register Today.
Gents/Ladies Does anyone have a good handle on how tight the GT3 Belts should be. I have now had a few issues with (as it turns out) loose belt...
Bingo Think I have found the issue. Mach 3 will run in Constant velocity or Exact mode (G61- G64 to cancel) Switching to exact the cuts are...
Matt I think this is more a function of the SW you use to interpret the G Code. I am using Mach3 and I do use the Z probing method supplied with...
Thanks for looking here is the vetric file Whoops - cannot upload that file type. Have renamed it dxf - when you get it rename to crv3d and it...
I you do make two!!!! :) Marcus
Results - Ignore the black dots, this marks where the tool exited [ATTACH] Red lines point to overcuts - I presume on the final finish pass as...
Ryan Thanks for looking and answering. OK - I have followed your advice - First and second Cut Strategy....Merged [ATTACH][ATTACH][ATTACH]...
Vetric Toolpath Strategy Gents (and Ladies) Does anyone have a good Strategy for milling multiple through cuts in MDF using Vetric. I have tried...
Matt Nice Build. The Quality of bits will improve side finish (using the correct feed and speed)as long as the correct stratergy is used, But the...
I think Grantman means a RELAY
Giannis I have a Chinese spindle 2.2KW running off a VFD Inverter. Speeds and on off controlled in Mach 3 through a suitable BOB Spindle uses...
Previous stated On the Vacuum tables..... I have created 3 Plenum Zones on the 1500x1500 bed, 2 off 500x1400mm, 1 off 300x1400. Each made of 3...
Get the 3mm Up Down spirals and 60 deg Cutter on ebay. Order the 3mm ones now as they come from China and take 3 weeks - come in packs of 5 or 6....
I have experience with MDF not Acrylic For engraving MDF I use a 60 deg Vbit. Works great with the Vetric Software. If you are cutting a groove...
John Really need to know what you are cutting - wood (hard/soft), man made (mdf), plastic, metal. Also are you engraving, Carving or cutting...
Ryan Eventually found the cause...... It was the belt tension on the LH Y Axis. All seemed tight and good. The test was to force the RH Y axis...
What sort of business and where are you based, may be a collaboration opportunity
Bjorn= You are right the code seems fine. Best take Ryans advice and cut down the cut depth see if that make s any difference.
Sorry, dont know anything about that SW. If the "Jitter" is not present in the G Code (have you run a simulation) then it seems to me that the...
Loosening the wheels made no difference, Tightening the belt made no difference. It must be a mechanical issue when the X is all the way to the...