Separate names with a comma.
Some features disabled for guests. Register Today.
By the way,maybe this is my problem? docs:interface:flash-run-jumper [OpenBuilds Documentation] i did not move the jumper to flash mode?
Thank you so much!
Sir,is there any tutorial how to reflash the bootloader.Thanks.
The usb was not unpluged during the flash.
I keep getting the FLASH FAILED error.I tried it at least 10 times.It was working perfectly til i tried to flash the controllet to 2axis machine...
When i tried to flash i got the error msg Flashing error or something like that. But now i cant connect the usb to the controller.Cant make a...
Thansk sir,i will take a try.
Hello,i would like to use limit switch only on two axes X,Y.Is there a way to use two of them?Am using the black box controller.Thanks.
Yesterday i was checking out the methods of holding down your material on the cnc bed.I came across with the aluminium t slot method.I was...
My Z0 is on the top of the material,and no,i did not surfaced the material...Tomorow i wil surface the top and then i will make a test drill holes...
I measured out everything.Spindle tramed.Spoilboard surfaced looks good.But the single line millingtest... the depth is still off.
[MEDIA] I checked everything,i found out the machine was a little bit off,but now is square.The x profile in now flat, and not twisted anymore as...
By the way,if i mill a 50x50 square the actual x/y lenght of the square is correct,so i think the y profile is little bit lower one side and its...
Thankyou alot sir,i will check everything i can!
Today i checked out the x axis profile and its not looking so straight.Also as you can see in my older post,the milling gets deeper on the right...
Something is not clear for me,if the x rail is bending while the machine is working than how is my spoilboard flat after surfacing.I mean if there...
So i made some changes.The motor coupler on the z axis is good.$1 is 255.I re-calibrated all the axis.The x,y axis are perfect.I also tried out...
Am using a black box controller, the cut was done with 2200rpm,30mm/s and depth of cut 2.5,using a 1.5kw vevor water cooled spindle. I will check...
Hi everyone,i just finished my spindle tram.I surfaced the spoilboard,its flat,no visible toolmarks,looks& feels flat.This is my second surfacing...