Separate names with a comma.
Some features disabled for guests. Register Today.
So that would be running the pulse and direction wires from both drivers to the Y axis on my bob. Is that correct?
That I can’t answer. The person that had it before me had it built for him said he never used it but was able to manually move all the axis’s...
Y driver
After tracing the wires from the A driver they are going to the “A” side of the control board. My “Y” driver wires are going to the Y side of the...
I can configure the “A” driver as a slave and it will activate the y axsis on the left side while the right side is separately activated by a...
[ATTACH]
Micro chip Driver DM542 are my drivers
[ATTACH] [ATTACH] Here it is ” [ATTACH]
I’m running Mach 3 off of my laptop using my arrow keys
I’m running mach3 I noticed that the “A” driver had red wire running to B- AND BLACK RUNNING TO B+. Switch them around but still nothing. I think...
I am building the Worker Bee 1000. I switched out both Y motors and the Y plug works with both motors but the A one gets no response
I unplugged my control board and forgot to take pictures of where the stepper motors plugged into. Each driver has an actual plugin for each...
