Separate names with a comma.
Some features disabled for guests. Register Today.
So I have OpenBuilds XYZ Probe and I'm not getting the expected results I'm looking for. I place the probe on my material. I place the magnet on...
Well... I am frustrated beyond words right now after spending the weekend trying to get this BlackBox dialed in. It WILL NOT CALIBRATE!!!! On one...
Awesome thanks Peter... I'll keep putzing with it.
It is dialed in tight on tramming. I saw to that... I would assume if I jogged my machine 100mm I would get 100mm. Not 99.025. Can the BB be that...
I'm going to go try it again.
I did... This was as close as I could get.
So I cut a test block on my Ultimate Bee CNC using OpenBuild's Blackbox X32. The test block dimensions are attached. I also attached my cut...
Thanks Peter. I'll check those tonight if I have issues and see if that sheds any light on the topic.
Good idea Craig I'll try that tonight.
Using the Openbuild Blackbox X32 with the Openbuilds Software. Just put my CNC together and am attempting to mill my spoilboard. I am trying to...
I am getting a "Homing Fail. Could not find limit switch within search distance." See attached image. Where in the GRBL settings do I adjust that...
is that something I could measure with a meter? Do I get more voltage on the tool wire if I send a higher speed from the control software?
So do you think it's a VFD setting I'm missing?
Yes I took the top off to see if all 4 wires were connected and they are. I can turn the spindle on with the control software but I only get 7800...
Thanks Peter I will read the link you sent but I have a shielded cable for the spindle and grounded it at the VFD. So not sure why I'd be getting...
I have a Huanyang 2.2kW Air Cooled Spindle Model #: HY02D211B Running it with the OpenBuilds Blackbox X32 I have set everything per the...
Thanks Peter!!!
Okay so I checked the list and not surprising the UB wasn't on the list... So I'm assuming I have to fill all that information out for my machine...
Ultimate Bee
No Peter I did not... Where in the documentation does it run me through all that? I can't find it. Is it under Software? If I can find the area...