Separate names with a comma.
Some features disabled for guests. Register Today.
I am plasma cutting out plates with 6mm holes, what's the best way to mark the hole locations so I can accurately drill them out to size later. I...
Plasma is 220volts on it's own breaker. Hypertherm shows stand alone earth ground rod (8feet long through garage floor) should connect to plasma...
Well I have the hole drilled through the garage floor and the ground rod about two feet in the earth, I'am going back out in the garage today and...
I had USB disconnects, program not finishing but since raising the torch wires and moving the plasma away from the table just about halve way...
Yea same post I didn't think the picture went through I had some difficulties on my end. It's BlowBack. Just on my way to buy 5/8 copper...
Sorry I did not list what kind of machine I am using. 1010 lead with plasma add on 32 Black Box and a 60 amp Everlast plasma cutter. I 'am new at...
Some beginner questions about EMI. Can't seem to get away from it. I am putting the BB and the power supply in a steel box with shielded motor...
Having trouble connecting to black box with WIFI. When I screch for IP I get 192.168.12.244 but it will not connect. Just read your post went to...
I do get a red led. So the red light only comes on when its overcurrent. Before reading your last post I turned it up just a little and the light...
I'll definitely check for the LED light, but this happens when I first start up so its not because of heat. It gets a little scary when the X axis...
Still new at this any help will be appreciated. This is about the third time this week when I tried to jog or home the Y motor (left side) -Y it...
Took the torch wiring out of the drag chain yesterday and everything seams to be working ok. I have been emailing the parts store but they don't...
Just a little bit into a very short and simple post the G-Code stops the table movement but the torch stays running. Once in a while the whole...
I am new also but aft reading your post now I am really confused. Everything I read says cutting height 1.5mm, Pierce height 3.8mm Clearance...
Sorry should have mentioned Plasma this is all new, a month ago I never even heard of G Code, I am not a computer person but I do use them just...
New at this. You will know that if you've read any of my posts. Seams like most are using Fusion 360 for design so thats what I've been learning,...
It took me awhile but I found it. Can I import it into Open Builds cam or do I have to use Fusion cam? Thanks guys this is very helpful.
Just went in and got my mouse I get the same thing, maybe I am in the wrong place. [ATTACH]
Can't find what version I am runing but it says I am up to date.
