Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks for the comparison. Peter just mentioned speed. If you have any valuable advice on CO2, I'd love to hear it.
It took me a while to think about what to reply to you. "Well, that's the problem of MAFFPL, you are not learning every day." You don't know...
I can see you're losing your patience. Pity. One learns every day. Well, thank you for your help. I disappear.
Peter, what do you think about this project? i also saw that lead 1515 and workbee 1010 are used in opt lasers. Did you mean that trapezoidal...
Alternatively, I'm wondering how to apply the strip to the c-beam profile.
The x-axis will look like the photo, instead of the rollers there will be a mgn12 linear guide with mgn12c carriages. Plus that 175 oz*in motor...
Ten engines were selected. I don't think there are many Nm. Will these trapezoidal screws be suitable? I can and buy from you, the most important...
I'm already lost :( so it's worth taking the 57HS3230?
Maybe you have knowledge and would like to share it. We have a 24V DC power supply. The 57HS3230 has a voltage of 3V and the MT-2303HS280AW has a...
What motors would you recommend? preferably dimensionally up to nema 23
By the way, do you think this product will be suitable for my project? Dimensions: Length: 1040mm Diameter: 8mm Thread pitch: 2mm Lead (movement...
I am building a machine on which a Co2 laser will eventually be used. However, I do not exclude that someday it can be used for milling. So what...
Hi, I am building a LEAD 1010 but I would like to change the stepper motors (2303HS280AW) to more powerful ones (57HS3230). Will the voltage match...
You are the best! thank you!
"You have only got S1 = 1/1000 = 0.01%? Should be S1000 - Check toolpath settings." Will you guide me where in the settings I can change this? I...
Example code. Do I have the settings right in blackbox?
; GCODE Generated by cam.openbuilds.com on 2023-07-11 G21 ; mm-mode G54; Work Coordinates G21; mm-mode G90; Absolute Positioning M3 S1; Spindle...
I checked the settings "briefly" and the laser worked at full power so it is operational. I am sending the backup. If you can, see what and how.
laser connection
adds the configuration file, and possibly screenshots if the file would be damaged.
