Separate names with a comma.
Some features disabled for guests. Register Today.
Well, I have no clue why, but I retested just now and it works as expected. The only difference is I rebooted the PC this morning.
Yes, this screenshot was taken with an esp-link between the two. This way I can sniff the traffic out of grbl easily. I have used the CNC with...
I tried all this. I also put a esp-link between the two to sniff the data and the BB is indeed sending all the settings. The app is not showing...
Latest Control decided to stop showing all Grbl settings: [ATTACH]
Would OB consider designing and selling a 32 bits brains board for the 8 bits blackbox? That would provide an upgrade path for current BB users...
Now it has reset in the middle of a job... even less fun...
Ok, so I measured the voltage at the BB and I get 4.97 ish volts. I get about the same at the other end of the cable. The solder jumper was...
Nope. I would say 99% of the time, the VFD is not even powered up. It still could be sinking power somehow. I will disconnect it and see if there...
Thanks, I will try these options. There is nothing unusual. The Interface is connected with the stock cable. I tightened the connectors a bit to...
This issue is still plaguing me... I seem to not have the issue when power is applied to the USB-C. I noticed that in test mode, the voltage is...
One still needs to take the key out to clean. The 8 chars filesystem doesn't help here as you run out of meaningful file names quickly. I get...
You are crushing my hopes ;) Kidding, I know it is not an intended use, but I wanted to explore. I really wish we could use the Interface for...
Is there a config to enable that? I see a new com port on my C when connecting the Interface, but Control doesn't connect. ERROR!: No supported...
Understood
I am not sure this is the right place to put this, please show me where if not... It would be nice to have a folder on the SD card in which we...
I have the blackbox wired to a VFD using the 1-10V terminal. I also use the onboard relay, configured as default, to send a signal to my...
Yes, connected to the stock Blackbox and a meanwell PSU. I will recheck my connections.
I have an issue where the interface randomly resets at Idle. So far, it never occurred while running a job. I tightened he contacts on the...
On the Interface. Not CONTROL. The I needed to know the offset because the variable for x and y jn the macro has half the bit size + offset.
I don’t have it. I have a home made version and I wated to adjust the probe macro for the Interface.
