Separate names with a comma.
Some features disabled for guests. Register Today.
Hi, does anyone have the equation for Profile line $100. I have a 4th axis cnc machine. X axis drives the chuck at 0.036 degree/step. I uses a...
Thanks
Hi i have the fourth axis built. x turns chuck, y is gore and aft and z is up and down. I have been trying to get turned profile to work for me. i...
I guess I made the wrong assumption about Control. Yes on one computer I am connected via usb to the x32 but on my other I am not connected to a...
i am running control 339. 4 days ago i could connect but yersterday and today i cannot connect. I have a good connection to wifi. Any thoughts....
Some doc stuff today but I will try both your idea and Peter’s given time. thanks john
I noticed that one set of gadget code I have for radial is different from others. I will have to check it out.
I have been looking at the gcode produced by the gadget. If you plot out the G1 commands for x and y you will see that the program is not running...
I found the rotary demon but all jobs are along the X and Wrap Y. I am along the Y and wrap X. I chose this augmentation since I wanted to make...
I see your recent edit but I am not sure what the edit means “ for some reason, it is plugging the Vcarve to the axis”
Just read your previous note again. The steps/mm =50929/ diameter applied at the circumference of the FiINISHED ( my word but implied by you)...
No I am not using the Rotary Demon post processor. I was not aware of it. Since I didn’t see an openbuilds rotary I figured openbuilds inches or...
I ran the creat rounding toolpath using the radial approach (around cylinder) with the suggested 444 steps/in. The x axis turned back and forth...
Hi my rotary chuck had a diameter of 4 inches. It converts to 319.18 mm circumference. When I run this cumference with a steps/mm of 500 I get a...
Hi in setting my rotary steps/mm, my chuck is 319.18 mm circumference. I took a guess and set the steps/mm in the profile to 500, set the x axis...
Processing of the variables did not work, at least not for now. I am in the process of walking into the correct steps/mm with a mark on my chuck....
Thanks MisterG and Peter. I am out of the house right now hopefully will get to jog it this evening. john
The chuck is 100:1, no pully, so we get 160,000 and then divide by 360 we get 444.44. So given that number I would want to check to see if it is...
In addition I have placed the GRBL program in a file and tried to Run Program in Control but nothing reasonable happened.
