Separate names with a comma.
Some features disabled for guests. Register Today.
Hello I am trying to calibrate the steps/mm on my rotary setup using a short grbl program to spin my chuck. I have used Girac's math and i don't...
Thanks got the Lead lathe file and printed out, will relax and read. On the previous question about the circumference I got almost all the steps...
"GRBL needs steps/mm which would apply at the circumference of the part you are machining for a wrapped toolpath." I am milling a 2 x 2" part out...
Hello, is there a grbl program that will tell me how to calibrate my x axis or 4th axis. I am using a 100:1 drive. Maybe something that generates...
I have x32 usb connected to bb. interface does not work, firmware not read. Grbl not connected. usb removed and interface works. is that the...
It was a fix that came to me as I was falling to sleep, plug in the usb dummy.
Today having a problem with control that was ok yesterday. Can’t find network in search network. Proper up is 192.168.6….when I scan after...
Checked wires and you were correct. Offending connection was hidden but once found and fixed the cnc operates smoothly and in the correct...
Thanks, I am certain one side is ok but not the other. Will check thanks john
The wires I changed had to do with y2. The nema 23 has printed on the motor BlackA+ , Green A- , RedB + , BlueB- . So since the 4 conductor wire...
The legs were done in 2 pieces on my cnc. Lots of filler and sanding.
I thought I could change one of the y’s direction using the interface but I was incorrect. I guess I will have to make a wireing change/swap.
I reset the INTERFACE and it is working now. I can probably fix the y issue now
Wonderful development, I loaded the profile again and the machine is almost working now. I changed nothing but it loaded properly. I know it is...
This is my backup, hope it helps
I am in control 1.0.370. Will disregard the mask. The interface was working with x4. Interface was purchased in the beginning. Interface...
Thanks for your thoughts profile is lead 1515 and saved/reset. Saved came on blue, I clicked on it, and it went gray. Hard limits was enabled...
If I hold down physical trigger switch the indicator on control/troubleshooting goes from red triggered to green off. As soon as I release, it...
Router on works thru iot switch
I loaded new profile for lead 1515 - I am not sure about 1. Limit switch installed, I have it on the left to make switch white - lead 1515...
