Separate names with a comma.
Some features disabled for guests. Register Today.
My advice based on doing a build class is to build one completely before doing the rest. You will learn a lot that makes the other builds go...
when you say a bunch of these printers, do you mean the GridBot Two or just Core XY printers?
I put the Raspberry Pi NoIR camera on most printers. And I'm about to try out this one. The camera provides a live view and also takes pictures at...
this USB cable will work. also, the marlin config I used is here in the GitHub project for the GridBot software.
the PI is in the CAD model mounted to the back of the screen, but perhaps not the BOM. Any version 3 or 4 will work. The PI connects to the SKR...
these are the rails I used: https://www.amazon.com/gp/product/B0762MKQFD yes, with gridbot software you can use keyboard / mouse instead of touch
1. you will need a bowden extruder driver like this https://www.amazon.com/gp/product/B07BMLD646 2. the gridbot software installs on a PI, if you...
I had the hardest time finding a reliable source of 24V heated beds and used several different ones in different build groups. Really, any 24V...
Mark, I understand your concern. And it's one I shared when I built the first prototype for this design a few years ago. However, several...
I run some with pi3 and some with pi4. The software is designed to run with a single script command. After that you just configure wifi through...
The touch display is the standard 7" Raspberry Pi model. It's attached to a Pi running this GridSpace/grid-bot
CoreXY and H-Bot configurations are designed to take weight out of the print head to enable faster printing with fewer ringing artifacts. This is...
I'm using sensorless homing now. But endstops are easy to add, if you prefer. The SKR is connected to the PI with a USB cable.
I'm using the raspberry PI noir cam with a long ribbon cable.
it's all either 3mm or 6mm thick acrylic. of course, the pieces are printable. the 6mm pieces should be printed heavy / solid. the 3mm pieces...
I built Marlin 2.0.x from source so I could make modifications. The code is here: GridSpace/grid-bot
Thanks. I was referring to the extrusion lengths used. 450x450x450 yields a build area of 300x300x350. It's easy to extend the Z lengths for...
This is my print farm. The top two are 450x450x350 and 450x450x550. The bottom two are both 450x450x450.
Thanks. The extrusions are 20mm x 20mm and it's quite rigid. I print between 100mm/s and 150mm/s. Attached is a close-up of a print.
SOA published a new build: Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints....
