Separate names with a comma.
Some features disabled for guests. Register Today.
i have found the spindle manufacturer (maybe?) Technical parameter-常州市华江电器有限公司 they say the spindle is rated from 1000 to 24000 rpm.. ive...
thanks for the advice, ive got some tubing and connectors of the right size for my pump in the post, ill park it until those arrive, then try the...
No, i didnt spend a lot, it was 239 euros for both spindle and huanyang vfd. I chose that model because a) it had an er16 collet b) it was...
one idea i had, which is probably a dreadful idea, was to route the vfd cable through one of those spiral metal shower hoses? they are very...
just wanted to follow up to say the people at IGUS are extremely helpful, and despite knowing im basically a hobbyist who only needs small amounts...
Thanks for the reply, its about the 5th time ive fired it up, obviously only for a few tens of seconds each time (probably 1 minute was the...
Ive temporarily wired up my new cheapo spindle and vfd to check all is working and set up the vfd.. Watercooling not connected (just run for a few...
Do you mean on the outside of the tube? As well as the wire inside? Might be a bit tricky to cable tie it every 6 inches inside the tube:D
Ok well that is a solid reccomendation., if im buying a standard hose, i can always replace it with a more spendy one later if i really need to....
Maybe i can do the same for an antistatic hose manufacturer
A very useful name drop.. A company that sells, in small quantities, in Europe! Ive emailed them for suggestions as they have tons of similar...
We have a few big box hardware stores here (italy) but they generally dont have a vast selection, and i was concerned about the resistance to...
Yes this has been suggested to me before, but i have also read in many places that it doesnt work half as well as a proper antistatic tube.. I am...
My neverending shopping list continues. Things which seemed minor turn out to be a real headache.. Antistatic vaccuum hose? Costs more that the...
Our house is a stone one with a very old tiled floor, its super wobbly. Ive got a pair of saw horses, so ill level something up on that.. Maybe...
Im worried that the torsion box i build wont be precise enough. Im getting the aprts cut at a local woodwork shop, but to save costs im doing the...
Hi thanks for the replies! I dont think its as simple as slicing into layers, the parts were separated in different angles.. Ive actually...
So prior to receiving my kit, i need a table to build it on.. thinking some kind of simple plywood torsion box, but it cant be too "solid" since...
Hi again.. I am trying to research basic cnc theory while waiting for my blackbee kit :) A good few years ago i knew someone with a big...
Obviously, neither do I! However i have read enough forum posts with people marvelling at how quiet they are due to the lack of fans.. That and...
