Separate names with a comma.
Some features disabled for guests. Register Today.
"They are Festool Clamping Elements - designed to work with their MFT surfaces.I machined similar holes directly into the MDF pallet and it seems...
Find out who makes them so we can attempt to get some better images.
I use a .8 for the same reasons. Collet capacity was an initial concern during design, but hasn't been an issue after the build. You can find...
I'm a fan of those table clamps he had.
If you're using 3 steppers then the G540 will work perfect with those motors and power supply. You'll also have the additional fourth axis if you...
Wrote this a couple of days ago; :confused: I'm on the edge of my seat with writing a guide for everything not mechanical. This is a really good...
2.5d has no undercuts.
The Gecko G540 or standalone drivers are more popular than the MX series. All of these are LPT port solutions so you'll need a PC with LPT to...
Hi Rangatang, You have the flow down for the most part. Computer>Control software>Control card>Drivers>Motor output. The PC has to be compatible...
Do you have a link to that thread?
Does one axis stall or both?
Does the problem occur during the rapid or at the beginning of movement?
Test your e-stop and limit switches? :) I would jog it around manually then test machine home and part home. Then run code. Have fun. Joe
Also, your acceleration rates may be too high.
Click on name. Then in the pop up you click on follow.
Lookin for help planning build It's important to add that you were not recommended the g540 out of concern for a specific build you have...
@semperfikurt Gecko 540 vrs mko or pro v?
Thank You. So far so good. If you have any specific questions I'd be happy to answer. Joe
20151221 by Joe Santarsiero posted Nov 26, 2016 at 8:29 PM Mine started a couple of years ago, but I know what you mean. I'm sure I'll be doing a...
I cant believe you're not going to finish that little beast....:( I really thought the force was with this one :blackeye: Edit: Whoops. Got this...
