Separate names with a comma.
Some features disabled for guests. Register Today.
I like it. 5th paragraph. Memorizing to mesmerizing.
If you're going to start with electronics first then spring a little extra for a higher overhead. The DQ542MA's sold here in the store max at...
I'm sorry to hear this. Please keep us updated. Fight the good fight Lord_drachenblut.
I still don't have limit switches!
Openbuilds Gearbox.
Open Kit CNC Controller.
Open Kit Tool Box.
Neat encoders. I wasn't aware of this style either. Do they just clamp onto the screw?
Openbuilds Multimachine Controller I like Openbuilds Multiple Axis Controller 1 or OMAC1 for short in the threads.
Did it bond or set-up loose?
Versa Box
Don't overrate Solidworks modeling. It's the least intuitive and still takes way too long to setup even if you are a trained modeler using it....
A wet lube can swell them which is why I leaned towards dry based lubes. Even then, swelling is minimal and not a big problem with Delrin. It...
I am confident those tools will be satisfactory with your foam testing. :D
Yeah. That's a lot of variables. Well, the efficiency of ballscrews over lead and the mdf def help your case. I'm using 52v, 425s, ballscrews,...
I'm not sure on that one. I think you could even get away with a dry graphite spray. Maybe even a light coat and wipe of dielectric(silicone) grease.
Nah, there's enough meat on the acme nut to guide itself colinear with the screw axis. However, I don't see a problem with doing this installed on...
Hey Selkov. Long time no see. What type of machinist lathe do you have?
Well, with the screws you just oil the threads once and the oil should hang out in there. With blind holes anyways :) Due to the lower friction...
Ah I see. Usually bags of blackoxide screws have a bit of rust inhibitor mixed in. From personal experience they don't always have enough to...
