Separate names with a comma.
Some features disabled for guests. Register Today.
What is the distance between the outside of the Y rail and the inside of the Y axis plate? If it's close to 1/2-3/4" a 20 degree pressure 20 pitch...
Extra Strong Ox or "ESO", I like it !! You'll have to design some pretty thick spacers to get the rack close enough to the motor. :)
Very Nice !!
I would use it since you already have it on hand. As for it's durability maybe someone else here has used one and can answer that. 25k rpm is...
The noise dissipated with 7 clamps on a 1500mm extrusion. As for side loading the shafts, ShopBot has used this system successfully for years on...
I don't have any issues with backlash or play, the springs tensioners keep the rack and spur gear in constant mesh with zero play, and I can...
Unfortunately Dave, I think i'm the only one here with it... I went that way because my 5' x 9' machine has been running R&P for the last couple...
Dave give me a few days and i'll have a BOM ready. I apologize for the delay, my sign business has kept me hopping for the last few weeks but i'm...
That little Dewalt is a good router, has a lot more power then you would think. Just a FYI might want to order a set of brushes from like...
Steve is right. The flex is most noticeable to the naked eye when doing drilling/plunging operations but make no mistake it's there when your just...
That's not really a simple question. It really depends on a multitude of things such as machine rigidity, spindle speed, spindle HP, bit used,...
I have a 5' x 9' machine also that runs Nema 34s 960oz motors. Your right about bit, i've had them hit the wall before... You only have one pair...
Thanks !! Here is a link to the electronics i'm running on this machine. Cncrouterparts Nema 23 If I do it again I will pick my own electronics...
I agree NC is a much better way to wire limit switches and Estops.. If there is a loose connection or break in the wire you'll know about it...
Sounds like a great idea !! Can't wait to see this one evolve ... Gerald
That's a really sharp idea. Only thing I might change is the 1/4 plate, to better resist flexing it might be a good idea to go to 1/2", price...
Add a second relay to control your vacuum and you'll be set ;) I have that same problem, I like cutting new parts and improving on them so much...
I have been using a Porter Cable 7518 on my other machine for the last couple years and it's been great, but I can run it for at least 2-3 months...
mmmmm I'll stick with my wireless Logitech keyboard with touchpad... I have to many issues with phone apps going nutz , I could see my 265lb...
Looks like a pretty good deal on those Keling drives. Even their price on the 540 isn't bad for 265.00. Each way has it's merits and negatives. I...
