Separate names with a comma.
Some features disabled for guests. Register Today.
I ran the same test program I did on Mach3 on GRBL using OpenBuild Control and it ran perfect, just as expected. Which means that as I thought,...
And the reason I don't see the save button active on a change?
First, I tried to change from 199 to 160, in the step/mm. To make sure it's a problem I randomly chose a setting, can't remember which one, that...
Why do most of the time, when I make a change to GRBL settings I don't get the 'save' icon to be blue, when I make a change, only one time it was...
Unfortunately it didn't help. I tried all the way from 1 to 19 and it didn't make a difference. I'm working now on converting it to GRBL. I'm...
@ca. 280, if you didn't solve your problem yet, try changing the common on the pulse and direction to the ground, or negative, and have the...
Thanks, David, I will try it out today and will report here of the results.
If you are looking on how to connect to them than most likely the easiest way is to solder to the connectors. There are special crimp plugs for...
:D :D :D
Yeah, I did all of that. Since the Y axis is missing steps on that g-code spot, rerunning the g-code without resetting Y 0 gets me a different...
But I still have to find out why I have this problem since my CNC is practically useless without tackling this problem. Anyone has an idea what...
Well...the DM 542's didn't help. Here is how the story developed. I'm using Mach3 I started with the Y axis having two NEMA 23 stepper with...
I can't tell if the 300W goes through the potentiometer. The best way is to check it with a Volt meter. If it shows full voltage on the two...
300w is pretty anemic. I don't know what you plan to cut with it but if it is 5mm foam board than it's fine but anything else you may not be happy...
On my Marlin software for my 3d printer the head goes up 5mm from where ever it is at the moment, without going down to 0, and than it homes to X...
I be damned, I can't reproduce it, even on my original drawing. For some reason now it works just like I expect it to work. Maybe shutting down...
@David the swarfer. David, I tried to make an inside cut in a pocket but it doesn't work as expected. The overlying of the pocket lines interfere...
67 is cold? My stepper work at 57 with not a peeps! Well, yeah, some peeps, but that's from me since I freeze! :banghead:
You can also try to the Array Copy tool just make sure you use the offset toggle as the distance.
LOL, or two 123 blocks one on top of the other! :)
