Separate names with a comma.
Some features disabled for guests. Register Today.
Mace, since you've said that the variation is 'not much - but it is noticeable' it means that the difference in the spacing between one end and...
I'm curious to see the machine when it's finished. I try to see, in my mind, where the material that you are going to cut will be but I can't with...
Plywood will work fine. Many have built their tables, including me, from plywood. If you have access to metal working tools and are more...
Randy, the question also is 'what are you planning to cut with the router?'. It makes a difference. If you are just going to make PCBs, for...
Very sturdy machine! :thumbsup: Is it going to be a Plasma cutter?
WOW, that's a great setup! Are the windows glass or plastic?
Try this.[ATTACH]
pauna, do yourself a favor and put two of these brackets on the router. Separate them as far apart as possible.
People take pictures in Portrait mode and then post it in Landscape, so it's difficult to tell which axis has the play. In the first batch of...
If you are moving in the Z axis you could get away with using the 8mm shafts as Rob said he's using on his Z axis. It will be much more compact...
Keith, clicking on any of the links in the build section downloads the same zip file. Is that by design?
What Rick suggested is a good idea but then I would consider renaming the X and Y axes so that the 0,0 point will still be on the lower left...
Could it be that you can't go smaller because of the bit diameter that you use? Maybe a smaller bit diameter will let you make smaller letters?
Shachar, once the motors don't have power they are just free wheeling as the electric brake is not active. If you use lead screws this may not be...
May I suggest that when you do the changes to the Axie do it one at a time and not both at once. That way you'll see which axis is causing the...
Yes Yes
Basically, all these aluminum extrusions, like the 20x20, 30x30, 20x40 and so on, are T-slots. If you look at the profile you'll see the T-slots...
I can't tell exactly from the many pictures that you've posted but I think the problem is that the X0 and Y0 in Vcarve is not in the same place as...
Peter is right, as long as it says 700 or 701 you'll get the correct router.
