Separate names with a comma.
Some features disabled for guests. Register Today.
Not a complete analysis of your test results, but start by looking for any possibility that there is a connection between the ground on your limit...
Almost all moves generated by cam software will be in absolute mode. That is because the origin you set in your cam software and the workplace...
Get a good quality (Meanwell) power supply - cheap ones can put your electronics at risk of damage. 24V Meanwell Power Supply Bundle Alex.
Wasn't sure whether you were saying you wanted to stay with Mach3 (in which case I think an old PC is the only option?) or not. A more up-to-date...
Yes. Just re-zero Z if you change the bit. Alex.
You can put your X & Y switches wherever you want (Z always homes to the top of it's travel) as long as you tell your controller where you put...
Bedtime here, which probably explains why I didn't fully understand what you were saying ;) Where have you located your switches/sensors on each...
That masks the problem rather than solving it. If you have a connection between mains EARTH and DC GROUND you have a potentially dangerous fault....
You have another small adjustment available on the V-wheels - the play in the screw acting as their axle. Adjust the eccentric to its loosest...
What controller are you using? If you jog; X+ve should move the tool right Y+ve should move the tool back X+ve should move the tool up If it...
Thought you had misread it (you said "mad" :)) - yes, cut the same toolpath to see if the original problem was caused by the material. Alex.
MDF - medium density fibreboard. Alex.
As @Peter Van Der Walt said, plus VFD to spindle cable as far away from other electronics as possible? Alex.
The back, right, up corner of the machines workspace is ALWAYS the maximum for each axis. Normally with a CNC mill/router that is zero and the...
Explanation in the link below. Don't calibrate with a cut - that includes other variables like backlash and tool deflection. Our leadscrews are...
PS, I don't recommend making a cut to calibrate - that includes any backlash and tool deflection into the calculation. Use the V bit as a pointer...
If you lose steps you don't get them back again. A square or circle would end up not lining up when it got all the way round. Slowing down for...
Openbuilds Parts Store ships everywhere as far as I know - contact them for quotes on things like shipping, but check with your own country's...
Try L20 - see the Duet g-code wiki in the link below GCode dictionary [ATTACH] Alex.
Translation;- Good morning. I would like to know if anyone could help me. I entered an SVG file. in Openbuilds cam. When I choose my toolpaths....
