Separate names with a comma.
Some features disabled for guests. Register Today.
Nope, diode laser is still in it's box. If you haven't got a laser module yet have a look at these links;- Jtech Lasers Opt Lasers For help...
Check for play in your Z axis and the eccentric adjustment on Z and X axes. It looks like tool deflection - does running the toolpath a second...
What post processor are you using with Fusion? docs:software:fusion360 [OpenBuilds Documentation] Alex.
A battery drill probably will - I assume you are talking about unscrewing it for disassembly. Alex.
@Jumelle Eryc, please post that in English. Thanks, Alex.
If I understand what you said above correctly I think you have got that wrong. Although there are two wires to each stepper motor coil they are...
There is a very small reduction in diameter to make it easier to insert into the nut blocks. It tells you in the link you posted - the diameter is...
Are you using the Openbuilds post processor for Vectric? (docs:software:vectric [OpenBuilds Documentation]) Upload your g-code file so we can...
Yes, you don't need soft limits enabled to home Alex.
When you jog your machine are all axes moving in the correct direction? Y +ve = tool moves back X +ve = tool moves right Z +ve = tool moves up....
What are the specs of that motor - in particulat its max current rating? See the advice on current adjustment;-...
Even with an aluminium router mount I find the tram needs tweaking if I remove the router and replace it. Alex.
If you home your machine, jog to the far end of an axis and check the MACHINE co-ordinate at that point the numerical value is your maximum...
That picture @Giarc suggested, with the axes and the high/low spots labelled will help us tell you where to look. Alex.
I was going to say it was this (see pic) but then I spotted that there doesn't seem to be a toolpath for the profile cut? [ATTACH] Alex. Or is...
Where you saved it when you created it in your cam software. How are you creating files to run on your CNC? What software are you using to design...
Have you set your $130,131 & 132 settings correctly for the max travel on each axis. Alex.
Afraid so - that is likely to be a fake. Alex.
Totally agree with @Misterg - except that last plunge is way deeper than the previous reductions in Z height. It looks to me as though there is...
