Separate names with a comma.
Some features disabled for guests. Register Today.
You are looking for continuity between mains EARTH and dc GROUND. Are you using a laptop? Is it plugged into the mains? Does unplugging it help?...
Re eccentric adjustment you should just be able to turn a wheel with your finger. Alex
Do please use the Openbuilds post processor for Fusion;- docs:software:fusion360 [OpenBuilds Documentation] Alex.
Please post your grbl settings and your g-code file so one of us can have a look at what might be wrong. Alex.
No, when you set XYZ zero (in the same place on your workpiece as you set the origin in your cam software) you are setting the Workplace...
Grbl is a control programme that uses g-code - grbl compatible g-code uses a (fairly extensive) sub-set of all the possible g-code commands...
Your screenshot is definitely not g-code. Your PDF is, but not grbl compatible g-code - there should be a header containing codes to set your...
Motor couplers is probably the commonest cause, but there are many other things it could be. Only someone standing next to the machine will be...
Grub screws = the small screws fixing the coupler to the motor shaft (make sure it is gripping the flat section of the shaft) and the leadscrew -...
Glad you fixed it. Could you explain the issue with the programme as I couldn't see any issue with the g-code you posted. Thanks, Alex.
I can say with absolute certainty that there's no problem with your g-code causing your spindle to gradually get lower during a job. I don't use a...
How did you calibrate your steps/mm? You need to do it over the longest distance you can accurately measure. You also need to take any backlash...
Yes you can. Alex.
It doesn't - you can use it to probe Z, but you can't probe X & Y with a V bit. I don't use a bit at all to probe X & Y, I use a brass rod of...
Could be because the Hello World toolpaths are pockets larger than your bit - allowing the chips to clear away from the cut area, whereas your job...
Just remembered that there's a belt link between the Z motor and the Z ballscrew on the Stronghold pro (I expressed my dislike of it during the...
$100 > $102 are the steps/mm settings (calibration), so the fact you are using a stronghold PRO explains why the settings are other than I would...
Have you investigated the possible mechanical issues @Misterg and I raised? Could you give us some more details about your CNC? - these settings...
Actually programmed to drill to 8mm depth;- G0Z2.0000 G1Z-5.0800F762.0 G0Z1.0000 G0Z-3.0800 G1Z-8.0000F762.0 G0Z1.0000 G0Z7.0500 so nothing...
Could you give us a bit more detail about what's going wrong? Alex.
