Separate names with a comma.
Some features disabled for guests. Register Today.
Is this the firmware you used? [ATTACH] I don't think your stepper drivers are really up to the job of running a cnc machine - they are OK for...
What happens if you set Z workplace zero above the spoilboard and run the file in air? Alex.
Can you post your grbl settings please? Check your $32 setting. Alex.
I can't see anything in that g-code that would cause that issue. One thing that puzzled me in your first post (I don't know anything about your...
As in the Autodesk grbl post? I thought that might be the case but I've not seen lead ins done like that - don't use that post. Thanks for the...
As @Misterg said, the only unusual thing I spotted in the file post processed with the grbl post was a couple of arcs in the YZ plane. I would...
That is not an error message - it is telling you that you didn't set a workplace co-ordinate system in Fusion cam set up, so it is selecting the...
Second the recomendation for the RoutER11 - I'm very pleased with mine. I don't work for Openbuilds by the way - just a satisfied customer. Alex.
NEMA 23 Stepper Motor would be a good choice. Alex.
Yes, but be aware that the number after "Nema" defines the mounting plate size. Check out the Nema23 spec (Google it) for the fixing holes...
I think the nema17's may also be part of the problem. Do you know the specs of those motors? It is likely that they are under powered for your...
If it's a profile or pocket cut and still lines up when it's gone all the way round you are not skipping steps - once you have missed a step you...
Please re-check your calibration - the pdf in the link below explains the theory, the video describes the calibration wizard in Openbuilds Control...
Options are, carry on using machine co-ordinates (G53) and choose the coordinates where you want to park it at the end of the job, or untick "use...
Are you using the Openbuilds post processor? docs:software:fusion360 [OpenBuilds Documentation] That uses the machine co-ordinates system to...
Sorry, missed that - bedtime here in the UK, but I'll try to have a look at it tomorrow. Alex.
I did ask if you could post your Fusion file - that might help us understand what is going on. Alex.
It's not your g-code - there is only one feed rate specified in the file you posted, and that is quite slow, so your machine is not doing what you...
RoutER11 (RoutER11 CNC Kit) comes with a 71 > 65 mm adapter sleeve. I have one and it's much superior to a palm router - better bearings, ER11...
If you have got rid of the backlash the next step is calibrating your machine (Calibrating your cnc) the pdf explains the theory, the wizard in...
