Separate names with a comma.
Some features disabled for guests. Register Today.
I am looking to introduce other colors and textures into my marquetry other than wood veneers. I've tried all kinds of paper, but it won't cut...
I’ll try that. Thanks!
Everything looked tight. I’m going to try and increase the current a bit.
I have a 1010 like cnc with linear rails with 2 y axes. Lead screw driven. After running for a while, it maintains a good of xy position while...
In 1944 a cartographer from the US Army Corps of Engineers took three maps of the Mississippi River from 1765 to the 1940s and drew a huge set of...
I’ve honed my method for cutting veneer on the CNC, now using a home built vacuum table out of MDF, instead of using spray glue. It’s 300mm square...
I’ll try that and see if it fixes it. Thanks!
Another thought. I turn the back box and power supply together. Should I be turning on the power supply first, then the controller?
The the fault indicator is indeed on. What does that mean? Should I up the current or pare it down, or is it some other issue?
I use a black box controller for my 1010 style CNC with dual motors on the y axis. Every fourth time or so when I start, the left motor is not...
I found a simple solution that works quite well. Rather than an electric pump and expensive bags, I found lots of inexpensive hand inflatable bags...
I’ll try that
N
I’ve been doing some marquetry with my newly built CNC and have been experimenting with the best ways. This is what I’ve come up with so far:...
I took the basic 1000mm linear actuator [ATTACH] Attached linear rails to the sides for stability [ATTACH] Use my old 3018 CNC to mill side...
I added some more pix to the build. Hopefully they will approve the changes soon.
You were 100% right. Both the lead screw and the nut were loose. Cuts perfectly now. Thanks!
I just build my Cnc and it seems accurate. Horizontal and vertical lines cut perfectly, but circles and some angled lines are wonky. My suspicion...
Thanks. Can you point me to where I can find out about those fixturing methods? I’m doing marquetry, so I need pretty precise z control. Not as...
