Separate names with a comma.
Some features disabled for guests. Register Today.
Sorry don't know why it is posting twice
[ATTACH] If this helps: [ATTACH]
my material is12" x 12" the part is not that big, only 4" long
[ATTACH] [ATTACH]
Misterg you were spot on with your calculations of 39.898. Good for X and Z, Y was 40.050. I usually work in a 2 foot x 2 foot envelope, so I...
No, but I do have a Meter-Stick.............:D:ROFL:
Yes, I was considering calibrating over 12 inches........:banghead:
Thanks Craig! If you think my calibration method is sound, I will proceed with a G-code run. I want to thank all who have helped guide me through...
Thank you all for your attention to this. So based upon your input, I used your calculations as a starting point. I used a dial indicator on all...
Hi Gary! Wasn't expecting a reply today so thanks. I was going to use the Calibration Wizard but it said that was just for fine tuning after you...
Yes, tis I again. So, my CNC is rack and pinion, not lead screw or belt drive (I went into the Grbl settings). The 12-tooth gear is mounted...
Thanks Gary! A picture is worth a thousand words, especially to those of us who are not electrical engineers!
Hi Gary! Again for those of us who have no idea what any of that means....:(:)o_O Thanks!
One more, I promise. How do I reverse the direction of one of my Y steppers?
Thanks much!
Everything seems to be firing! I have one more question before I do any axis movement. I am setting up Custom Machine parameters. When it asks...
Thanks Peter I will go through each step. Sorry, I am a Plug and Play kind of guy and not familiar with the intricacies of the electronics world!
Open Builds is finding 0 devices. I have tried all USB ports. Am I missing something? Also controller shows red light under Y2. Switched Y and Y2,...
Hi Ya'll! Well, I finally converted my CNC Mogul Router over with all new Open Builds components. Before I fire it up for the first time, I would...
