Separate names with a comma.
Some features disabled for guests. Register Today.
Ok, he hadn’t posted his gcode at that time, so I was making assumptions based on the limited data provided.
Ok, look for a tool path / operation setting along the lines of "keep tool down".
Which CAM software are you using to generate the tool paths? I'd suggest that it's a setting in that that is the issue - eg in Fusion 360 there...
Why? Just press the home button. As long as you’ve set the homing direction correctly for each axis, you are good. Then you just jog the spindle...
yes it definitely does. If your controller is told to expect normally closed, and they are normally open, it will cause issues. normally closed...
Sorry but I think you misunderstand the workflow needed for CNC. I highly recommend you watch this video. [MEDIA] Edit: oops wrong video, this...
This exactly. I highly recommend this beginner video on router bits. [MEDIA]
You don’t need to justify yourself to me, I added the winky smiley to indicate it was a wind up. I guess it didn’t translate. :cool:
You would say that, wouldn't you! ;)
That is weird. The things I would check are cooling (the little steppers get hot). If you are using TMC drivers, replace them with A4988 drivers...
Lol, Mr Plod sure makes life fun sometimes!
Yikes, that is some crazy electrical madness!
Considering how stupid non technical ppl can be, I personally don’t think non certified ppl should be playing with 240v @ 15 amps. ppl still do...
It's actually illegal to do your own electrical work in Australia, unless you get it signed off on by a registered electrician.
Cheers, nice relay board! I only used an SSR to power on my spindle as I had one lying around. My current solution uses standard relays for...
I have the same issue on my MKS DLC32. I have turned off soft limits because they don’t work with continuous jog, incremental jog works fine.
Nice work, that's a very easy circuit to make. Are you running this on a BlackBox?
That could work for a tool height sensor - I'd have to check if they are 2 or 3 wire. That said, touching off the 3D probe against a tool height...
Hmm, good ideas. Would there still be enough relays to control air assist/cooling and vacuum chip extraction? PS, ideally I’d like to have both...
Just thinking about this some more - why not add more advanced features? If done right, it won't make OBC harder to use. Just look at macOS, it's...
