Separate names with a comma.
Some features disabled for guests. Register Today.
Cheers, I think I'll make a manual probe "switch" to get around it for now - NO is a bad idea for sensing on CNC machines, you won't know if a...
What about the BB? AFAIK it only supports one probe input?
So now that 3D Touch probes and Tool Height Sensors are affordable, is OB planning to support them in a future BlackBox + in Control? Eg : 3D...
It turns out that the AU spec router isn't earthed, it just has a 3-pin plug. [ATTACH]
The twisted pair should help with that. Jon does recommend using TP for that reason.
I didn't, but I'll check this before before I fire it up. EDIT: that was one reason I used stranded Cat5e twisted pair wiring - it helps suppress...
Cheers. The Aus spec unit is already using a 3 pin grounded plug and cable, plus it has an X2 class capacitor for noise suppression. :cool:...
I finally got back to my CNC project, I recently got an air blaster / mister - so I drilled and tapped some holes into the mounting bracket. I’m...
I finally got back to my CNC project, I finally got around to taking my spindle apart to install the relay and wiring for the GRBL_SPD controller....
Is Nice, I just need to finish the wiring now! [ATTACH] [ATTACH]
I decided I wasn’t entirely happy with the initial white on black lid (it came out looking grey), so I reprinted it in black on white and it looks...
My OCD kicked in, so I added 10mm in height and 20mm depth to the case to make wiring less crowded and released it as v3.5.
I finished building an updated version of my router electronics case. It’s a little crowded, so I might make the case a little bigger. The...
I realised I made a mistake with the 4-pin Female XLR Sockets, I accidentally used the wrong model for the specified Amphenol sockets (which is...
I still haven't gotten around to installing the GRBL_SPD mod yet (it's been ~10c for the last few days :eek:) - but I have spent time improving...
My kit arrived during the week and I've been gradually putting together new wiring and designing a new all in one electronics case for it....
awesome, great to know.
So are you saying I don’t need to do anything different to use TTL control instead of the normal spindle output?
General question, Im planing to integrate a TTL/PWM controller for my Makita Spindle via the TTL port on my MKS DLC32 v2.1. Normally the TTL port...
And here’s some info on GRBL for ESP32.
