Separate names with a comma.
Some features disabled for guests. Register Today.
Autodesk fusion 360 is free and now has a simplified version of hsm cam built in :). And for making models has anyone tried onshape, currently in...
your drivers mate, I felt I inadvertently gave you the idea you can run them with a 48v psu, an error on my part. That was all. But it seems you...
Have to remain a mystery that one the only difrence between the 36v which is compatible and the 48v according to the datasheets is the voltage,...
Sorry Have I missed something, you said they were the same as the wantai drivers?
This will give you an idea: http://www.linengineering.com/BLDC-Motors/BLDC16-NEMA17.aspx And below a link clearly outlining the 48v psu is non...
Think you have made a error in your motors rated power, typically a 4.5a motor is rated at around 110-130watts, a 2.8a is more like 20-30watts. I...
No you don't is the answer to that, if I were to jam the axis the pinion will slip which is clear evidence. Motors are only as powerful as the...
wantai have metric micro step settings :)!! I use 1/10 on the ox with the 400w 24v psu 3nm 4.5a motors and still get the feeling they could pull...
is that per coil or across both coils? Could you explain please, little confused as you say you haven't received the wantai drivers yet. Yes Tb...
i was going to say, lucky you about the amps but after reading the rest I think, I retract that statement.
you can also get 12a supplies, on the basis that its not very likely in cnc routing that you demand a high current from all of your drivers at the...
Motors are cnc4you. 3nm with 20:1 planetary gearbox but then they are geared back up on the pinion so still around 3nm. 36v on the ox, 48v on...
Not actually sure if they are wantai, they have received a fair amount of rebranding so may have been branded under wantai, the model numbers for...
yeah no problem. just moved machine into an industrial unit so need to set them up early next week but next available opportunity Ill get one up.
two of them with nema 23's move my 200kg gantry fine, and rip through ply at 3000mm/min at 22mm doc so id say pretty extensively
5- 8 hours a day/7 days a week most weeks, not had a single issue with them, have plenty of current, cant turn them right up without cooking the...
yeah they quite possibly have the worst website and documentation. but they are motion controller, usually you can tell simply by looking at the...
the ess is a 2 in one. ie motion controller and bob.
That Bob would work nicely with the uc300, having a motion controller with Mach 3 is essential imo
Uc300 is an excellent board, has option of Mach 3 or uccnc software, which has the benefit of being cheaper at £30 and seems to run the motors...
