Separate names with a comma.
Some features disabled for guests. Register Today.
:zipit: To make a bank of them running 24/7 for orders, :D someday. baby steps. will fit a 10hp atc spindle at some point for cutting alumimum and...
Sunny day today, so thought id work on her outside, and the wheels come in handy for that, Though the missus wants to enter it in a red bull soap...
Ty, cnc4you.co.uk is all hiwin. sourced all running gear from him, hes pretty good with advice also. Unless you mean the profiles which came form...
nema 34 8nm for x, 2 x nema 23 with 20:1 planetary gearbox 45nm with 40 tooth pinion to bring speed back up for y+a, Nema 23 for z. Should have...
Almost finished :) My biggest fear considering I'm £7000 in a hole with this was flex, but thankfully its solid as a rock :) [IMG]
Good tip, Thanks Tweakie, I would have otherwise found out the hard way im sure.
Okay found out this can be done by mach 3
Any one know of a cam with tangential knife function? With Mach 3 post processor. Jon.
could you not just buy the part?.
[MEDIA] listen to that spindle struggle. Scary
there you go miles - making the part you wanted with that. (quite impressed actually) Just dont go blowing yourself up with a diy gun.
Sorry to say it but you'd need to be a magician to make that with an ox. That will require a 5 axis mill or water jet and a fair bit of know how....
hsm user. :thumbsup:
Current is the most important factor especially for cutting aluminium. Your first link is for 3d printing and is likely to be of a very low...
If you have a motion controller with a descent buffer you can use a less powerful PC. reduces the chance of lag being an issue. But p4 1gb ram is...
That should work fine
Ac psu's? Do you mean dc? Dc stepper drivers are more common, I'd be suprised if you had ac drivers for nema 23's as generally only used for...
Most likely down to flex, These though they can cut aluminum do make a rackett doing it.
I use these automotive connectors between motors and wire harness: http://uk.rs-online.com/web/p/automotive-connectors/8700764/ and the male:...
Are you talking about the 3kw Bosch? That's 5 pounds heavier than say a kress 800. I think you'd also have to upgrade from belts with extra 2...
