Separate names with a comma.
Some features disabled for guests. Register Today.
If you click on your profile pic you can look up "Your Content" Meanwhile; Auto level of Y axis on USB break out board Alex.
Do NOT disconnect the earth lead from pin 4 on your spindle - that is an essential safety feature. If anything were to go wrong internally it...
The link below might help. First thing to check is that your spindle has an earth connection on pin 4 of the connector on the spindle. Second...
English please. Alex.
Check that $4=0 to get the motors moving. Not going to answer your other points as its bedtime here in the UK, but I'm sure someone from a...
Glad you found it. Alex.
That could also be the cause of your problem if your max speeds or acceleration settings are too high. Post your grbl settings so we can see if...
That is most likely an intermittent wiring fault - check the wiring to the motor that doesn't keep up with the other one. If it's not happening...
Most likely a mechanical issue - check for something working loose such as the grub screws in a motor coupler. Alex.
I have had Duet for the past 4&1/2 years so I'm a little bit biased but yes, Openbuilds have made the Blackbox system as easy to set up as they...
Not for an Openbuilds machine, but the link below might help you get started. Log into Facebook | Facebook Andy Ofori is the expert on the Duet...
What sort of limit switches do you have? If you haven't already got them have you considered these - Xtension Limit Switch Kit. Although you...
Have you loaded a machine profile? Interface connection Alex.
Unfortunately your screenshot (please do a proper screenshot rather than using a camera to take a pic of the screen - it's much easier to read)...
Yes. Do those first. If that doesn't provide enough adjustment try the ones with the eccentrics. Alex.
If you can get at the screws and nuts holding the wheels then you can try the trick I suggested - it's the wheels without the eccentrics that you...
You didn't read the pdf I posted - you don't put the distance it actually moved into the grbl settings, and your Y, X and Z settings may each be...
They shouldn't be overtightened - you should JUST be able to turn a wheel with your finger. You also have a small amount of adjustment with the...
@Christian James, I'm guessing that's a translation problem, as there is no way the OP would have got the result he did with a drill bit. @mlowka...
Not quite - the guide in the attached file explains why you need to calibrate steps/mm and the theory of how to do it. The wizard in Openbuilds...
