Separate names with a comma.
Some features disabled for guests. Register Today.
The fuse in any appliance protects the circuitry behind it. If the appliance develops a fault it prevents that causing further faults in pevious...
If you have Openbuilds motors use the wiring diagrams in the documentation section (docs:blackbox-4x:connect-nema23 [OpenBuilds Documentation]),...
Ratrig (Portugal) are an Openbuilds re-seller and sell genuine RoutER11's. Not sure whether they will be cheaper than buying from Openbuilds or...
Your problem is that the Rep-Rap firmware on the Duet wants a G command on every line - if it comes across a F1500 on its own it will throw a...
PS, if you want to change your Duet config files to work in the negative quadrant as grbl (and many other controllers) does you would need to find...
As @Peter Van Der Walt suspects, the Duet works in the positive quadrant of 3d space - grbl works in the negative quadrant. The back, right, up...
Yes. As @Peter Van Der Walt said its stored in EEPROM. Just re-home and the controller will know where the workplace coordinates system zero is....
If you mean mesh bed levelling (probing multiple points to map the surface) I don't think grbl can do that (I have no idea whether grblHal as used...
How did you set your workplace coordinates system zero (XYZ zero)? The centre of the bit should be lined up with the point where you set the...
I realise you may not have an appropriate bit, but the best way to use a compression bit is to first do a rough pass with an upcut bit (still 1/2...
We need a bit more info to understand your problem - what did you update? what cad/cam software and post processor are you using? I'm puzzled by...
Yes. Alex.
The X0, Y0 and Z0 corner (in the machine co-ordinate system) in a grbl system is the back, right, up corner. It is also the maximum dimension for...
Yes, explanation of all grbl configuration settings in the first link, max speed settings in the second. grbl/settings.md at master · gnea/grbl...
Don't be embarassed - the only silly question is the one you don't ask. We were all beginners once and we don't mind answering basic questions...
Not necessarily the whole solution to your problems, but I strongly recommend the Openbuilds post processor for Fusion. docs:software:fusion360...
Please upload your g-code file here. Alex.
As @David the swarfer said, and do use the Openbuilds post processor for Fusion. docs:software:fusion360 [OpenBuilds Documentation] Alex.
If you look closely at the screenshot @sharmstr posted above, you will see that one of the options on the drop down list was to set a new...
@dim135245, we are going to need a bit more information. If this is happening at the start of a job did you home your machine before starting the...