Separate names with a comma.
Some features disabled for guests. Register Today.
In English please. Alex.
Yes, ALWAYS home the machine after switching on, resetting the controller etc - it's the only way to establish the MACHINE co-ordinate system...
As well as asking the experts here, can I suggest that you join the Facebook group linked below. There's a wealth of experience there with the...
Turn it upside down in order to probe just Z. Alex.
Did you follow the link? Lots of good advice there. Alex.
You have a depth of cut of 1.5 mm and you are plunging straight in with a 1/8" bit. Your feedrate for the next move of 3810 mm/min is a bit fast...
Sounds as though you "lost" your usb drivers (corrupted, Windows update??). docs:blackbox:install-drivers [OpenBuilds Documentation] Alex.
I'm sure someone will correct me if I'm wrong, but I believe grbl ignores those G41, 42 codes? As far as I am aware you have to put the actual...
That recess is (I believe) a hangover from an earlier design (the nut blocks have been used in several different machines and for several years)....
Let the nut align itself with the leadscrew. Alex.
You should only run your steppers at between 60~80% of their maximum rated current (3.36A) so, yes, they should be fine. Alex.
The nut blocks should be tightened to the gantry plate tight enough to stop it moving and no more. When adjusting the nut blocks, tighten one to...
You include it in your g-code file for each job. What cad-cam software and post processor are you using? Alex.
Can't answer your question about Sketchup/Sketchucam, but dxf files are the vectors in the design (ie a way of saving the drawing), g-code files...
Steps/mm are determined by your micro stepping settings and the pitch of the thread on your leadscrews (which will not be perfectly accurate -...
No, please upload the actual g-code file - the file you uploaded to your controller. Camera shots of a screen are really hard to read. Alex.
The macro David is suggesting would go to X0 Y0 at a safe height, then you could go to Z0. If you want the macro to do that last move for you add...
What Fusion 360 license do you have? - the personal use license doesn't allow post processing more than one tool, so you wouldn't be able to...
You need to calibrate your steps/mm - leadscrews are not absolutely accurate. Openbuilds control has a wizard for that. Alex.
Full steps, yes. But at 8*microstepping it's 1600 steps/revolution. Alex.